Home prodotti
Altoparlanti
Altoparlanti da soffitto
Altoparlanti a colonna Altoparlanti da soffitto Flat Field Altoparlanti sospesi Altoparlanti con montaggio su superficie Accessori e montaggi altoparlante Altoparlanti PoE Subwoofer
CS 123T
CS 120P CS 1226T Plus CS 123T CS 26T Plus CS 3T SF 10C SUB SF 26CT SF 26CT LP SF 26X SF 3C LP SF 3CT LP SF 8CT SUB SGK SF26C SGK SF3C

Twitter Copia il link

Stampa

Pro

CS 123T

Sistema per altoparlanti a soffitto SpeedMount full‑range da 70/100 V

Caratteristiche principali

Sistema per altoparlante brevettato a due componenti per installazioni su controsoffitto in più fasi
Il contenitore e l'inserto per altoparlante possono essere installati separatamente da diversi tecnici che si occupano di bassa tensione e altri che si occupano del sistema AV
Consente un notevole risparmio di tempo e denaro per l'installazione dell'altoparlante a soffitto
Driver full-range da 76 mm
Dispersione conica di 165° per una copertura estesa e un posizionamento flessibile degli altoparlanti
Funzionamento a 8 Ω diretti o 70/100 V su un selezionatore a sei posizioni dietro la griglia
Tutte le caratteristiche

Complete CS 123T SpeedMount Ceiling Speaker System

CS 120P Plenum Rated Enclosure and CS 3T Full-Range Open Back Ceiling Speaker

CS 123T SpeedMount System, shown installed

Previous Next

Galleria immagini

AutoDesk Revit

Strumento di selezione altoparlanti

Descrizioni per consulenti

Configuratore altoparlanti

Il prezzo e la vendita si riferiscono a coppie di altoparlanti

Panoramica
Video
Descrizione
Specifiche
Diagramma
Pannello illustrativo
Download

Panoramica

Il sistema per altoparlanti da soffitto SpeedMount^® CS 123T di Extron è un sistema per altoparlante a due componenti brevettato, certificato plenum e a basso profilo. Offre una dispersione conica estremamente ampia di 165° per una spaziatura flessibile degli altoparlanti. Il sistema è progettato per applicazioni in cui si ricercano un alto livello di intelligibilità e massima copertura per annunci pubblici e in ambienti con soffitti bassi. L'innovativo sistema è composto dal contenitore qualificato plenum CS 120P e dall'inserto per altoparlante full-range CS 3T. Il contenitore si installa rapidamente in controsoffitti con pannelli da 61 cm x 61 cm o 60 cm x 60 cm. L'inserto per altoparlante presenta un driver full-range da 76 mm e può essere usato per un funzionamento a 70/100 V o 8 Ω. CS 123T è disponibile come set completo oppure CS 120P e CS 3T possono essere acquistati separatamente per un'installazione in più fasi.

Video

Descrizione

Specifiche

Diagramma

Pannello illustrativo

Download

Prodotti visionati di recente

CS 123T

Descrizioni per consulenti

Selezionare un codice articolo:

Select a Part Number:

Copia testo Copiato Si è verificato un errore. Riprovare più tardi.

CS 123T

Provide a two-piece speaker system for suspended ceilings that shall consist of a full-range open back speaker with wide coverage and an internal transformer, as well as a plenum ceiling tile enclosure, and shall accommodate division-of-labor installations.
1. Two-piece speaker system consisting of a full-range open back speaker with an internal transformer for 8 ohm direct and 70/100 volt operation, plus wide 165° conical dispersion, as well as a plenum rated enclosure for suspended ceilings
  1. Driver Requirements
    1. Shall consist of a 3" (7.6 cm) full-range driver
  2. Performance Requirements
    1. Shall provide a frequency range of 118 Hz to 20 kHz, -10 dB below average SPL, measured on-axis in half space
    2. Shall provide a power handling capacity of 16 watts (rms) continuous pink noise per IEC 60268-5 and 32 watts (rms) continuous program
    3. Shall provide a nominal sensitivity of 87 dB SPL (1 W, 1 m) measured in half space
    4. Shall provide a nominal impedance of 8 ohms per speaker
    5. Shall provide a nominal conical coverage angle of 165°
  3. Electrical Requirements
    1. Shall support 8 ohm direct or 70/100 volt connection from power amplifiers
    2. Shall provide a 6 position, through-the-grille power tap selector
      1. Shall provide selectable rotary switch taps for 70 volt operation, including 16, 8, 4, 2, and 1 watt, and 8 ohms direct
      2. Shall provide selectable rotary switch taps for 100 volt operation, including 16, 8, 4, and 2 watts, and 8 ohms direct
      3. Shall provide speaker tap selector and selection guide on the front of the speaker
    3. Shall provide an internal overload protection circuit
    4. Shall support one incoming and one outgoing speaker level signal on one 4-pole, 5 mm captive screw connector
      1. Shall support wiring multiple speakers using parallel or loop-through wiring
      2. Shall support a maximum wire gauge of 12 AWG per connection point for a single wire
      3. Shall support a maximum wire gauge of 16 AWG per connection point for two wires
  4. Speaker Cartridge Enclosure Requirements
    1. Shall have a white, paintable textured finish
    2. Shall provide a thin-edged bezel surrounding the grille
    3. Shall measure 10.3" (26.2 cm) in diameter from bezel edge to edge
    4. Shall measure 3" (7.6 cm) in height from mounting surface to top of withdrawn locking arm posts
    5. Shall weigh 3.4 lbs (1.6 kg) per speaker cartridge
    6. Shall require 9.2" (23.4 cm) diameter opening in mounting surface for speaker cutout
    7. Shall provide a white, paintable magnetically-attached perforated steel grille with black scrim
  5. Ceiling Tile Enclosure Requirements
    1. Shall consist of a 1' x 2' (20.5 cm x 61 cm) tapered cube designed with aluminized fiberglass, plastic, MDF, and steel materials
    2. Shall provide glass polyfill insulation
    3. Shall measure 23.7" (60.1 cm) in length
    4. Shall measure 11.7" (29.7 cm) in width
    5. Shall measure 4.9" (12.4 cm) in depth
    6. Shall weigh 6.0 lbs (2.72 kg) per ceiling tile enclosure
    7. Shall be compatible with US 2' x 2' suspended ceiling grids and metric 600 mm x 600 mm suspended ceiling grids
  6. Mounting Requirements
    1. Shall provide four, baffle-integrated spring-loaded locking arms
    2. Shall be installed in plenum environments
  7. General Requirements
    1. Shall be sold with a pair of ceiling tile enclosures and a pair of full-range speaker cartridges
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, NFPA 70, and NFPA 90A
      2. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, only when speaker cartridge is used with included plenum ceiling tile enclosure
      3. Shall meet UL 1480 for commercial and professional audio systems
      4. Shall comply with appropriate requirements of RoHS and WEEE
    3. Shall provide five year parts and labor warranty
2. Approved device shall be the Extron CS 123T, part number 42-242-03; no alternates or equals.

CS 123T

Provide a two-piece speaker system for suspended ceilings that shall consist of a full-range open back speaker with wide coverage and an internal transformer, as well as a plenum ceiling tile enclosure, and shall accommodate division-of-labor installations.
1. Two-piece speaker system consisting of a full-range open back speaker with an internal transformer for 8 ohm direct and 70/100 volt operation, plus wide 165° conical dispersion, as well as a plenum rated enclosure for suspended ceilings
  1. Driver Requirements
    1. Shall consist of a 3" (7.6 cm) full-range driver
  2. Performance Requirements
    1. Shall provide a frequency range of 118 Hz to 20 kHz, -10 dB below average SPL, measured on-axis in half space
    2. Shall provide a power handling capacity of 16 watts (rms) continuous pink noise per IEC 60268-5 and 32 watts (rms) continuous program
    3. Shall provide a nominal sensitivity of 87 dB SPL (1 W, 1 m) measured in half space
    4. Shall provide a nominal impedance of 8 ohms per speaker
    5. Shall provide a nominal conical coverage angle of 165°
  3. Electrical Requirements
    1. Shall support 8 ohm direct or 70/100 volt connection from power amplifiers
    2. Shall provide a 6 position, through-the-grille power tap selector
      1. Shall provide selectable rotary switch taps for 70 volt operation, including 16, 8, 4, 2, and 1 watt, and 8 ohms direct
      2. Shall provide selectable rotary switch taps for 100 volt operation, including 16, 8, 4, and 2 watts, and 8 ohms direct
      3. Shall provide speaker tap selector and selection guide on the front of the speaker
    3. Shall provide an internal overload protection circuit
    4. Shall support one incoming and one outgoing speaker level signal on one 4-pole, 5 mm captive screw connector
      1. Shall support wiring multiple speakers using parallel or loop-through wiring
      2. Shall support a maximum wire gauge of 12 AWG per connection point for a single wire
      3. Shall support a maximum wire gauge of 16 AWG per connection point for two wires
  4. Speaker Cartridge Enclosure Requirements
    1. Shall have a white, paintable textured finish
    2. Shall provide a thin-edged bezel surrounding the grille
    3. Shall measure 10.3" (26.2 cm) in diameter from bezel edge to edge
    4. Shall measure 3" (7.6 cm) in height from mounting surface to top of withdrawn locking arm posts
    5. Shall weigh 3.4 lbs (1.6 kg) per speaker cartridge
    6. Shall require 9.2" (23.4 cm) diameter opening in mounting surface for speaker cutout
    7. Shall provide a white, paintable magnetically-attached perforated steel grille with black scrim
  5. Ceiling Tile Enclosure Requirements
    1. Shall consist of a 1' x 2' (20.5 cm x 61 cm) tapered cube designed with aluminized fiberglass, plastic, MDF, and steel materials
    2. Shall provide glass polyfill insulation
    3. Shall measure 23.7" (60.1 cm) in length
    4. Shall measure 11.7" (29.7 cm) in width
    5. Shall measure 4.9" (12.4 cm) in depth
    6. Shall weigh 6.0 lbs (2.72 kg) per ceiling tile enclosure
    7. Shall be compatible with US 2' x 2' suspended ceiling grids and metric 600 mm x 600 mm suspended ceiling grids
  6. Mounting Requirements
    1. Shall provide four, baffle-integrated spring-loaded locking arms
    2. Shall be installed in plenum environments
  7. General Requirements
    1. Shall be sold with a pair of ceiling tile enclosures and a pair of full-range speaker cartridges
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, NFPA 70, and NFPA 90A
      2. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, only when speaker cartridge is used with included plenum ceiling tile enclosure
      3. Shall meet UL 1480 for commercial and professional audio systems
      4. Shall comply with appropriate requirements of RoHS and WEEE
    3. Shall provide five year parts and labor warranty
2. Approved device shall be the Extron CS 123T, part number 42-242-03; no alternates or equals.

Aggiungi articolo al carrello

Order Message Number

Codice articolo

Nota: I prodotti Extron che usano la presa AC universale accettano molti tipi di prese AC diversi. Prima dell’uso, si assicuri che il dispositivo soddisfi tutti i requisiti normativi per la sua regione e sia conforme con i codici e gli standard locali di sicurezza ed elettrici applicabili.

Q.tà

Totale attuale:

Visualizza carrello

CS 123T -

Dettagli del prodotto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Condividi l'articolo via e-mail

CS 123T

Sistema per altoparlanti a soffitto SpeedMount full‑range da 70/100 V

Invia a: *

La preghiamo di inserire un indirizzo e-mail valido.

Messaggio:

( caratteri rimanenti)

Inviami una copia

Grazie. Il messaggio è stato inviato.

Si è verificato un errore durante l'invio del messaggio. Riprovare più tardi.