Home prodotti
DTP Systems
Trasmettitori
Trasmettitori DTP3 Trasmettitori DTP2 HDMI - Trasmettitori serie 230 HDMI - Trasmettitori serie 330 DVI - Trasmettitori serie 230 DVI - Trasmettitori serie 330 DisplayPort - Trasmettitori serie 230 DisplayPort - Trasmettitori serie 330 Trasmettitori multi-formato Ricevitori Ricevitori DTP3 Ricevitori DTP2 HDMI - Ricevitori serie 230 HDMI - Ricevitori serie 330 DVI - Ricevitori serie 330 DisplayPort - Ricevitori serie 230 DisplayPort - Ricevitori serie 330 Distributori Switcher Switcher con supporto DTP Trasmettitori DTP con switcher Scaler e processori di segnale Matrici Cavi e accessori DTP Cavi twisted pair digitali Connettori RJ-45 schermati Strumenti di terminazione a crimpare Connettività architetturale
DTP3 T 321
DTP3 T 101 D DTP3 T 202 DTP3 T 202 EU/MK DTP3 T 203 DTP3 T 211 DTP3 T 212 D DTP3 T 301 DTP3 T 321 DTP3 T 322 D DTP3 T 331

Twitter Copia il link

Stampa

Nuovo Pro

DTP3 T 321

Trasmettitore DTP3 USB-C 4K/60 con supporto di dati e Power Delivery

Caratteristiche principali

Trasmette video con audio embeddato, dati USB, alimentazione e controllo fino a 100 m su un cavo CAT 6A schermato
Supporta risoluzioni video fino a 4K/60 e 5K
Fornisce connettività a sorgenti USB-C^® che supportano la modalità DisplayPort-AltMode
Fornisce potenza per caricare la sorgente USB-C
Connettività host USB‑C
Due collegamenti di dispositivi USB locali
Tutte le caratteristiche

Previous Next

Si consiglia il cavo twisted pair schermato XTP DTP 22 di Extron

Galleria immagini

Panoramica interattiva

Video in primo piano

Strumento di selezione DTP

Descrizioni per consulenti

Calcolatore di data rate 8K

Nota: DTP3 T 321 non è compatibile con DTP3 R 301 per estensione dati USB.

Panoramica
Video
Descrizione
Specifiche
Diagramma
Pannello illustrativo
Download

Panoramica

DTP3 T 321 di Extron è un trasmettitore twisted pair digitale che permette di inviare segnali video USB-C, audio embeddato, dati USB, alimentazione e controllo RS-232 bidirezionale fino a 100 m su un cavo CAT 6A schermato. È dotato di un input USB-C, un'uscita HDMI locale e due porte per dispositivi USB. Il trasmettitore supporta risoluzioni video fino a 4K/60 con campionamento cromatico 4:4:4, è conforme HDCP 2.3 e integra tecnologia EDID Minder^®. Per potenziare al massimo la qualità delle immagini e ridurre al minimo la latenza, tutte le risoluzioni video supportate sono trasportate senza compressione. DTP3 T 321 integra carica di dispositivi USB-C a 60 W e supporta fino a 100 W di potenza in abbinamento all'inseritore di alimentazione UPI 100 di Extron. Collegamenti locali per host e dispositivi con supporto di dati USB 10Gbps e alimentazione remota dei ricevitori DTP3 semplificano l'integrazione in ambienti professionali complessi.

Video

Descrizione

Specifiche

Diagramma

Pannello illustrativo

Download

Prodotti visionati di recente

DTP3 T 321

DTP3 T 331

USB Extender xi Series

DTP3 T 321

Descrizioni per consulenti

Selezionare un codice articolo:

Select a Part Number:

Copia testo Copiato Si è verificato un errore. Riprovare più tardi.

DTP3 T 321

Provide a twisted pair transmitter that shall support the distribution of USB-C® video, data, embedded audio. and control over a shielded CAT 6A cable
1. Rack-mountable transmitter for the extension of USB-C video, data, and control
2. Video input requirements
  1. Shall provide one (1) USB-C input
  2. Shall support USB-C sources with DisplayPort Alt Mode
  3. Shall support digital video resolutions up to 4K/60 @ 4:4:4 color sampling
  4. Shall provide one (1) HDMI buffered input loop-through for local monitor support or system expansion
3. Audio input requirements
  1. Shall support embedded digital audio on USB-C input
  2. Shall support multiple embedded audio formats
  3. Shall support embedded HD lossless audio formats
4. Video output requirements
  1. Shall provide one (1) RJ-45 for connection to an Extron DTP3-enabled product
  2. Shall be configurable for sending digital video, audio, and bidirectional RS-232 signals to an HDBaseT™-enabled display
5. USB data requirements
  1. USB host connection
    1. One (1) USB-C, shared with video input
    2. Shall support data transfer rates up to 10 Gbps
  2. USB device connections
    1. Two (2) USB type A
    2. Shall support transfer rates up to 10 Gbps
  3. USB extension requirements
    1. Shall support access to USB devices attached to a remote receiver connected to the DTP3 output
    2. Shall support transfer rates up to 480 Mbps
6. Transmission requirements
  1. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
  2. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
7. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Provide a set of pre-stored EDID files
    2. Support capture of EDID from any connected display
    3. Support user uploading of custom-generated EDID files
    4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
8. HDCP requirements
  1. Shall be HDCP 2.3 compliant with backward compatibility for earlier HDCP versions
9. Control/Remote – RS-232 pass-through over shielded CAT 6A requirements
  1. Shall provide connection for AV device control
    1. One (1) 3-pole captive screw: RS-232 pass-through over DTP
10. Power requirements
  1. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
  2. Shall support USB-C device charging up to 60 watts
  3. Shall provide DIP switch on front panel for selection to provide power to a connected DTP3 receiver
  4. Shall support USB-C device charging up to 100 watts when connected to Extron UPI 100 power injector
11. General requirements
  1. Shall include a USB-C configuration port on the front panel for configuration access and firmware updates
  2. Enclosure shall be rack-mountable, half rack width, and 1RU in height
  3. Shall provide visual indication of RJ-45 signal and link status for DTP port
  4. Shall provide visual indication for signal presence, USB device, and USB-C power delivery status on front panel
  5. Shall provide Extron LockIt® Plus cable lacing brackets
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS and WEEE
  7. Shall provide at least three (3) years parts and labor warranty
Approved device shall be the Extron DTP3 T 321(60-2017-52); no alternates or equals

DTP3 T 321

Provide a twisted pair transmitter that shall support the distribution of USB-C® video, data, embedded audio. and control over a shielded CAT 6A cable
1. Rack-mountable transmitter for the extension of USB-C video, data, and control
2. Video input requirements
  1. Shall provide one (1) USB-C input
  2. Shall support USB-C sources with DisplayPort Alt Mode
  3. Shall support digital video resolutions up to 4K/60 @ 4:4:4 color sampling
  4. Shall provide one (1) HDMI buffered input loop-through for local monitor support or system expansion
3. Audio input requirements
  1. Shall support embedded digital audio on USB-C input
  2. Shall support multiple embedded audio formats
  3. Shall support embedded HD lossless audio formats
4. Video output requirements
  1. Shall provide one (1) RJ-45 for connection to an Extron DTP3-enabled product
  2. Shall be configurable for sending digital video, audio, and bidirectional RS-232 signals to an HDBaseT™-enabled display
5. USB data requirements
  1. USB host connection
    1. One (1) USB-C, shared with video input
    2. Shall support data transfer rates up to 10 Gbps
  2. USB device connections
    1. Two (2) USB type A
    2. Shall support transfer rates up to 10 Gbps
  3. USB extension requirements
    1. Shall support access to USB devices attached to a remote receiver connected to the DTP3 output
    2. Shall support transfer rates up to 480 Mbps
6. Transmission requirements
  1. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
  2. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
7. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Provide a set of pre-stored EDID files
    2. Support capture of EDID from any connected display
    3. Support user uploading of custom-generated EDID files
    4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
8. HDCP requirements
  1. Shall be HDCP 2.3 compliant with backward compatibility for earlier HDCP versions
9. Control/Remote – RS-232 pass-through over shielded CAT 6A requirements
  1. Shall provide connection for AV device control
    1. One (1) 3-pole captive screw: RS-232 pass-through over DTP
10. Power requirements
  1. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
  2. Shall support USB-C device charging up to 60 watts
  3. Shall provide DIP switch on front panel for selection to provide power to a connected DTP3 receiver
  4. Shall support USB-C device charging up to 100 watts when connected to Extron UPI 100 power injector
11. General requirements
  1. Shall include a USB-C configuration port on the front panel for configuration access and firmware updates
  2. Enclosure shall be rack-mountable, half rack width, and 1RU in height
  3. Shall provide visual indication of RJ-45 signal and link status for DTP port
  4. Shall provide visual indication for signal presence, USB device, and USB-C power delivery status on front panel
  5. Shall provide Extron LockIt® Plus cable lacing brackets
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS and WEEE
  7. Shall provide at least three (3) years parts and labor warranty
Approved device shall be the Extron DTP3 T 321(60-2017-52); no alternates or equals

Aggiungi articolo al carrello

Order Message Number

Codice articolo

Nota: I prodotti Extron che usano la presa AC universale accettano molti tipi di prese AC diversi. Prima dell’uso, si assicuri che il dispositivo soddisfi tutti i requisiti normativi per la sua regione e sia conforme con i codici e gli standard locali di sicurezza ed elettrici applicabili.

Q.tà

Totale attuale:

Visualizza carrello

DTP3 T 321 -

Dettagli del prodotto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Condividi l'articolo via e-mail

DTP3 T 321

Trasmettitore DTP3 USB-C 4K/60 con supporto di dati e Power Delivery

Invia a: *

La preghiamo di inserire un indirizzo e-mail valido.

Messaggio:

( caratteri rimanenti)

Inviami una copia

Grazie. Il messaggio è stato inviato.

Si è verificato un errore durante l'invio del messaggio. Riprovare più tardi.