Home prodotti
Fibra ottica
Extender in fibra ottica
Trasmettitori di commutazione universale Extender DisplayPort Extender HDMI Extender DVI Extender USB Accessori Switcher in fibra ottica Matrici in fibra ottica Bobine di cavi in fibra ottica Connettori ed accessori per fibra ottica Cavi pre-assemblati in fibra ottica
2LC SM P
2LC OM4 MM P 2LC SM P PowerCage 411

Twitter Copia il link

Stampa

Pro

2LC SM P

Insiemi di cavi in fibra ottica monomodale insensibile alle curvature da LC a LC - Plenum

Caratteristiche principali

Fibra monomodale insensibile alle curvature
Rivestimento esterno OFNP qualificato plenum
Costruzione durevole del cavo duplex zip-cord
Terminati con connettori standard LC
Lunghezze disponibili da 1 a 30 metri
Tutte le caratteristiche

Galleria immagini

Panoramica interattiva

Descrizioni per consulenti

Panoramica
Video
Descrizione
Specifiche
Diagramma
Pannello illustrativo
Download

Panoramica

Gli insiemi di cavi in fibra ottica monomodale insensibile alle curvature 2LC SM P di Extron sono disponibili in varie lunghezze da 1 a 30 metri. La fibra insensibile alle curvature è caratterizzata da un raggio di curvatura stretto per limitare la perdita di flessione e per semplificare l'installazione. La perdita limitata della fibra monomodale offre prestazioni ottimali per la trasmissione di segnali AV fino a 30 km.

Video

Descrizione

Specifiche

Diagramma

Pannello illustrativo

Download

Prodotti visionati di recente

2LC SM P

GUI Designer

2LC SM P

Descrizioni per consulenti

Selezionare un codice articolo:

Select a Part Number:

Copia testo Copiato Si è verificato un errore. Riprovare più tardi.

2LC SM P/1

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a one (1) meter (3.3 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/1 (part number 26-670-01), no alternates or equals

2LC SM P/1

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a one (1) meter (3.3 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/1 (part number 26-670-01), no alternates or equals

2LC SM P/3

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a three (3) meter (9.8 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/3 (part number 26-670-03), no alternates or equals

2LC SM P/3

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a three (3) meter (9.8 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/3 (part number 26-670-03), no alternates or equals

Aggiungi articolo al carrello

Order Message Number

Codice articolo

Nota: I prodotti Extron che usano la presa AC universale accettano molti tipi di prese AC diversi. Prima dell’uso, si assicuri che il dispositivo soddisfi tutti i requisiti normativi per la sua regione e sia conforme con i codici e gli standard locali di sicurezza ed elettrici applicabili.

Q.tà

Totale attuale:

Visualizza carrello

2LC SM P -

Dettagli del prodotto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Condividi l'articolo via e-mail

2LC SM P

Insiemi di cavi in fibra ottica monomodale insensibile alle curvature da LC a LC - Plenum

Invia a: *

La preghiamo di inserire un indirizzo e-mail valido.

Messaggio:

( caratteri rimanenti)

Inviami una copia

Grazie. Il messaggio è stato inviato.

Si è verificato un errore durante l'invio del messaggio. Riprovare più tardi.