Home prodotti
Fibra ottica
Extender in fibra ottica
Trasmettitori di commutazione universale Extender DisplayPort Extender HDMI Extender DVI Extender USB Accessori Switcher in fibra ottica Matrici in fibra ottica Bobine di cavi in fibra ottica Connettori ed accessori per fibra ottica Cavi pre-assemblati in fibra ottica
FOX USB Extender Plus
FOX USB Extender Plus Serie USBA Pro Plenum

Twitter Copia il link

Stampa

Pro

FOX USB Extender Plus

Extender su fibra ottica per periferiche USB

Caratteristiche principali

Estende periferiche USB a distanze molto lunghe su cavi in fibra ottica
Supporta dispositivi USB da 2.0 a 1.0 e dispositivi USB 3.0 che consentono un funzionamento a date rate USB 2.0 fino a 480 Mbps
Il ricevitore integra un hub a quattro porte con 5 V, 500 mA disponibili su ogni porta
Emulazione periferica
Indicatori LED di stato in tempo reale per monitoraggio e risoluzione dei problemi
Compatibile con le matrici della serie FOX Matrix di Extron per sistemi di distribuzione del segnale fino a 1000x1000 o maggiori
Tutte le caratteristiche

Previous Next

Galleria immagini

Panoramica interattiva

Video in primo piano

Descrizioni per consulenti

Nota: la serie FOX USB Extender non è compatibile con i prodotti FOX USB Extender Plus.

Panoramica
Video
Descrizione
Specifiche
Diagramma
Pannello illustrativo
Download

Panoramica

FOX USB Extender Plus di Extron è un set trasmettitore e ricevitore per la trasmissione su lunghe distanze di segnali USB su cavi in fibra ottica. Progettato per garantire affidabilità e prestazioni eccezionali, utilizza tecnologia Extron completamente digitale per garantire una trasmissione perfetta del segnale. Questo extender su fibra ottica è compatibile con dispositivi USB 3.0, 2.0, 1.1 e 1.0 con indici di trasferimento dati fino a 480 Mbps. Progettato nello specifico per sistemi AV, FOX USB Extender Plus è dotato di molte caratteristiche che semplificano l'integrazione quali emulazione periferica, un hub attivo a quattro porte che fornisce 5 V, 500 mA per porta e monitoraggio del sistema in tempo reale. I contenitori compatti a basso profilo ne consentono un'installazione a scomparsa.

Video

Descrizione

Specifiche

Diagramma

Pannello illustrativo

Download

Prodotti visionati di recente

FOX USB Extender Plus

DDTX DVI & DDRX DVI

Serie WPD 100 audio

One RCA Female to BNC Female Adapter, One 3.5 mm Stereo Mini Jack to Solder Tabs

NetPA U 2008 FX

FOX USB Extender Plus

Descrizioni per consulenti

Selezionare un codice articolo:

Select a Part Number:

Copia testo Copiato Si è verificato un errore. Riprovare più tardi.

FOX T USB Extender Plus MM

Shall provide a transmitter that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus MM (60-1474-11); no alternates or equals

FOX T USB Extender Plus MM

Shall provide a transmitter that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus MM (60-1474-11); no alternates or equals

FOX R USB Extender Plus MM

Shall provide a receiver that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus MM (60-1474-21); no alternates or equals

FOX R USB Extender Plus MM

Shall provide a receiver that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus MM (60-1474-21); no alternates or equals

FOX T USB Extender Plus SM

Shall provide a transmitter that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus SM (60-1474-12); no alternates or equals

FOX T USB Extender Plus SM

Shall provide a transmitter that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus SM (60-1474-12); no alternates or equals

FOX R USB Extender Plus SM

Shall provide a receiver that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus SM (60-1474-22); no alternates or equals

FOX R USB Extender Plus SM

Shall provide a receiver that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus SM (60-1474-22); no alternates or equals

FOX T USB Extender Plus HID MM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID MM (60-1526-11); no alternates or equals

FOX T USB Extender Plus HID MM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID MM (60-1526-11); no alternates or equals

FOX R USB Extender Plus HID MM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for supported peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID MM (60-1526-21); no alternates or equals

FOX R USB Extender Plus HID MM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for supported peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID MM (60-1526-21); no alternates or equals

FOX T USB Extender Plus HID SM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID SM (60-1526-12); no alternates or equals

FOX T USB Extender Plus HID SM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID SM (60-1526-12); no alternates or equals

FOX R USB Extender Plus HID SM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Shall provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Shall provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID SM (60-1526-22); no alternates or equals

FOX R USB Extender Plus HID SM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Shall provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Shall provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID SM (60-1526-22); no alternates or equals

Aggiungi articolo al carrello

Order Message Number

Codice articolo

Nota: I prodotti Extron che usano la presa AC universale accettano molti tipi di prese AC diversi. Prima dell’uso, si assicuri che il dispositivo soddisfi tutti i requisiti normativi per la sua regione e sia conforme con i codici e gli standard locali di sicurezza ed elettrici applicabili.

Q.tà

Totale attuale:

Visualizza carrello

FOX USB Extender Plus -

Dettagli del prodotto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Condividi l'articolo via e-mail

FOX USB Extender Plus

Extender su fibra ottica per periferiche USB

Invia a: *

La preghiamo di inserire un indirizzo e-mail valido.

Messaggio:

( caratteri rimanenti)

Inviami una copia

Grazie. Il messaggio è stato inviato.

Si è verificato un errore durante l'invio del messaggio. Riprovare più tardi.