Home prodotti
Scaler e processori di segnale
Switcher seamless
Processori di annotazione Scaler video Processori multi-immagine Matrici con scaling Convertitori video Graphic Still Store
ISS 612
ISS 608 ISS 612

Twitter Copia il link

Stampa

Pro

ISS 612

Switcher HDMI, DisplayPort e 12G-SDI 4K/60 con commutazione completa

Caratteristiche principali

Commutazione immediata completa fra 12 input digitali
Numerosi effetti di commutazione fra cui transizioni a tendina, in dissolvenza e di taglio
Output Preview e Program
Processore avanzato di scaling Vector™ 4K di Extron
Gli input e gli output 12G‑SDI supportano risoluzioni fino a 4K/60 con genlock
Supporta risoluzioni video fino a 4K/60 con campionamento cromatico 4:4:4
Tutte le caratteristiche

Previous Next

Galleria immagini

Panoramica interattiva

Scaling Vector 4K

Video in primo piano

Pattern di test 4:4:4

Descrizioni per consulenti

Calcolatore di data rate 8K

Panoramica
Video
Descrizione
Specifiche
Diagramma
Pannello illustrativo
Download

Panoramica

ISS 612 di Extron è uno switcher seamless con 12 input che consente di presentare in maniera dinamica contenuti HDMI, DisplayPort e 12G-SDI fino a risoluzioni 4K/60. Offre una combinazione di commutazione immediata completa e tecnologia avanzata di scaling Vector™ 4K. Per migliorare la commutazione delle sorgenti e agevolare l'utilizzo in ambienti live, lo switcher offre numerosi effetti di transizione immediata, output HDMI e 12G-SDI di anteprima mirrorati e un'interfaccia semplice da utilizzare sul pannello frontale. Ulteriori opzioni di controllo includono RS‑232 ed Ethernet. L'inserimento di loghi, il supporto di sovraimpressione video e modalità PiP si accompagnano ai contenuti principali, mentre l'estrazione dell'audio contribuisce a semplificare l'integrazione. La modalità matrice aggiunge transizioni immediate automatiche alle matrici dotate di output HDMI. Queste caratteristiche e potenzialità rendono ISS 612 una soluzione di commutazione di segnali immediata e completa perfetta per ambienti di presentazione live di fascia alta.

Video

Descrizione

Specifiche

Diagramma

Pannello illustrativo

Download

Prodotti visionati di recente

ISS 612

Descrizioni per consulenti

Selezionare un codice articolo:

Select a Part Number:

Copia testo Copiato Si è verificato un errore. Riprovare più tardi.

ISS 612

Provide a seamless switcher that shall support video resolutions up to 4K @ 60 Hz over HDMI, DisplayPort, and SDI inputs from multiple sources to Program and Preview HDMI and SDI outputs
1. Rack-mountable switcher for HDMI, DisplayPort, and 12G-SDI source signals with or without embedded audio
2. Video Input Requirements
  1. Shall provide six (6) female HDMI Type A connectors for digital video signals
  2. Shall provide two (2) female DisplayPort connectors for digital video signals
  3. Shall provide four (4) female BNC connectors for digital video signals
  4. Shall support HDMI 2.0 and DisplayPort 1.2 signals up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling, and 12G-SDI signals up to 4K/60 with 4:2:2 color sampling.
  5. Shall support 12G‑SDI, 6G‑SDI, 3G‑SDI, and HD‑SDI signals at data rates from 270 Mbps to 11.88 Gbps
  6. Shall automatically adapt to SMPTE and ITU digital video standards for SDI signals
  7. Shall provide buffering on BNC inputs
  8. Shall support genlock on BNC inputs
  9. BNC inputs shall provide loop-through
3. Video Output Requirements
  1. Shall provide two (2) female HDMI type-A connectors
  2. Shall provide two (2) female BNC connectors
  3. Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
  4. Shall support 12G‑SDI, 6G‑SDI, 3G‑SDI, and HD‑SDI signals at data rates from 270 Mbps to 11.88 Gbps
  5. Shall automatically adapt to SMPTE and ITU digital video standards for SDI signals
  6. Shall provide buffering on BNC outputs
  7. Shall support genlock on BNC outputs
  8. Shall support custom user-defined output resolutions via EDID management
  9. Shall provide two (2) independent video buses that shall enable the operator to view video prior to audience display
    1. One (1) Preview output
    2. One (1) Program output
  10. Shall provide picture controls for brightness, contrast, and detail, as well as horizontal and vertical sizing, positions, and zoom for both Preview and Program output buses
  11. Shall provide upscaling and downscaling of input sources with 30-bit precision processing and 4:4:4 color bandwidth
  12. Shall provide video format conversion
  13. Shall allow one or more video outputs to be muted
  14. Shall allow one or more video output images to be frozen
4. Audio Management Requirements
  1. Shall switch embedded multi-channel audio, along with video, to the Preview and Program HDMI and SDI outputs
  2. Shall provide two (2) 3.5 mm 5-pole captive screw connectors for Preview and Program audio output
    1. Stereo/mono
    2. Balanced/unbalanced
  3. Shall provide audio extraction of two-channel audio to the Preview and Program analog audio outputs
  4. Shall provide audio extraction of multi-channel audio to the Program analog audio output
  5. Shall provide unity gain from input to output
  6. Shall provide individual audio output muting
5. Switching and Processing Requirements
  1. Shall support switching between input sources using front panel buttons
  2. Shall provide multiple effects for transitioning between Preview and Program outputs
    1. Wipes in four directions and of selectable duration
    2. Selectable hard/soft wipe edge
    3. Dissolve with selectable duration
    4. Seamless Cut
  3. Shall allow any input image to be displayed on-screen simultaneously with another image for picture-in-picture – PIP display and allow:
    1. Dynamic sizing of window
    2. Window positioning at any X:Y coordinate
    3. Transitioning into or out of the image using the dissolve effect
  4. Shall provide sixteen (16) PIP presets
  5. Shall allow title information or other input source content to be keyed over the program image
  6. Shall allow a logo graphic to be positioned and keyed over live video
    1. Upload of a .BMP, .JPG, .PNG, or .TIFF format logo graphic
    2. Selectable full screen image display in resolutions up to 4K/60
  7. Shall allow storage for up to sixteen (16) logo images
  8. Shall allow a selectable transparency level to be applied to a logo image or graphic
  9. Shall provide motion-adaptive deinterlacing for signals up to 1080i
  10. Shall provide aspect ratio control
    1. When in FILL mode, the video image on the output screen shall always fill the output screen without letterbox or pillar box
    2. When in FOLLOW mode, the video image on the output screen shall always preserve the original aspect ratio of the input signals
  11. Shall provide storage and recall of video parameters and picture settings
    1. Automatic memories for each video input
      1. Save video settings and picture adjustments without user intervention
      2. Automatically recall settings when the same video rate is encountered
    2. Layout presets
      1. Save picture adjustments, transition effect settings and duration, window size and position, video key settings, logo preset, background image, and Preview input
      2. Save and recall layout presets using front panel controls
      3. Save and recall layout presents electronically via RS-232, Ethernet, or USB connection
    3. Manual input presets
      1. Save video settings and picture adjustments
      2. Save and recall input presets using front panel controls
      3. Save and recall input presents electronically via RS-232, Ethernet, or USB connection
  12. Shall provide automatic 3:2 and 2:2 pulldown detection
6. EDID Communication Requirements
  1. Shall include technology to automatically manage EDID communication between connected devices
    1. Maintain continuous EDID communication with the connected sources
    2. User-selection of EDID from a remotely connected display
    3. User-selection of EDID from pre-stored data files
7. HDCP Requirements - HDMI inputs
  1. Shall be HDCP 2.3 compliant
  2. Shall provide an option to disable HDCP processing at an HDMI input connection when passing unencrypted content
  3. Shall include technology to authenticate and maintain continuous HDCP encryption and key exchange between connected devices
  4. Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is sent to a non-HDCP compliant display
    1. When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
    2. When disabled, the output shall be muted
  5. Shall provide real-time verification of HDCP status for HDMI inputs and outputs
    1. Electronically accessible over RS-232, Ethernet, or USB connection
    2. Status information available on front panel LCD display
8. Control Requirements
  1. Shall provide one (1) female mini USB port on front panel for configuration and setup
  2. Shall provide lockout mode to restrict access to controls
  3. Shall provide alternatives for configuration and operation
    1. Back-lit buttons with LCD menu display on front panel
    2. Rotary dials on front panel for image adjustment and positioning
    3. On-screen menus navigated using front panel controls
    4. Product configuration software connected via Ethernet or USB
    5. Serial commands sent over Ethernet, RS-232 or USB connection
  4. Shall provide one (1) RJ-45 connector on rear panel for LAN connection
  5. Shall provide one (1) bidirectional RS-232 3-pole captive screw connector on rear panel for RS-232 control
9. Outboard Switching Requirements
  1. Shall allow two (2) HDMI inputs to cause a connected matrix switcher with HDMI outputs to emulate a seamless switcher
10. Power Requirements
  1. Shall be equipped with an internal, universal AC power supply with a seven- (7) year parts and labor warranty
11. General Requirements
  1. Shall provide internal video test patterns and pink noise generator for calibration and setup of display devices
  2. Shall provide visual signal on LED indicators located on rear panel for link status
  3. Shall have a 2U high, full rack width metal enclosure
  4. Shall be rack mountable
  5. Shall include Extron LockIt® HDMI cable lacing brackets
  6. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Product appropriate RoHS and WEEE
  8. Shall provide at least three (3) years parts and labor warranty
12. Approved device shall be the ISS 612 (60-1685-01); no alternates or equals

ISS 612

Provide a seamless switcher that shall support video resolutions up to 4K @ 60 Hz over HDMI, DisplayPort, and SDI inputs from multiple sources to Program and Preview HDMI and SDI outputs
1. Rack-mountable switcher for HDMI, DisplayPort, and 12G-SDI source signals with or without embedded audio
2. Video Input Requirements
  1. Shall provide six (6) female HDMI Type A connectors for digital video signals
  2. Shall provide two (2) female DisplayPort connectors for digital video signals
  3. Shall provide four (4) female BNC connectors for digital video signals
  4. Shall support HDMI 2.0 and DisplayPort 1.2 signals up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling, and 12G-SDI signals up to 4K/60 with 4:2:2 color sampling.
  5. Shall support 12G‑SDI, 6G‑SDI, 3G‑SDI, and HD‑SDI signals at data rates from 270 Mbps to 11.88 Gbps
  6. Shall automatically adapt to SMPTE and ITU digital video standards for SDI signals
  7. Shall provide buffering on BNC inputs
  8. Shall support genlock on BNC inputs
  9. BNC inputs shall provide loop-through
3. Video Output Requirements
  1. Shall provide two (2) female HDMI type-A connectors
  2. Shall provide two (2) female BNC connectors
  3. Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
  4. Shall support 12G‑SDI, 6G‑SDI, 3G‑SDI, and HD‑SDI signals at data rates from 270 Mbps to 11.88 Gbps
  5. Shall automatically adapt to SMPTE and ITU digital video standards for SDI signals
  6. Shall provide buffering on BNC outputs
  7. Shall support genlock on BNC outputs
  8. Shall support custom user-defined output resolutions via EDID management
  9. Shall provide two (2) independent video buses that shall enable the operator to view video prior to audience display
    1. One (1) Preview output
    2. One (1) Program output
  10. Shall provide picture controls for brightness, contrast, and detail, as well as horizontal and vertical sizing, positions, and zoom for both Preview and Program output buses
  11. Shall provide upscaling and downscaling of input sources with 30-bit precision processing and 4:4:4 color bandwidth
  12. Shall provide video format conversion
  13. Shall allow one or more video outputs to be muted
  14. Shall allow one or more video output images to be frozen
4. Audio Management Requirements
  1. Shall switch embedded multi-channel audio, along with video, to the Preview and Program HDMI and SDI outputs
  2. Shall provide two (2) 3.5 mm 5-pole captive screw connectors for Preview and Program audio output
    1. Stereo/mono
    2. Balanced/unbalanced
  3. Shall provide audio extraction of two-channel audio to the Preview and Program analog audio outputs
  4. Shall provide audio extraction of multi-channel audio to the Program analog audio output
  5. Shall provide unity gain from input to output
  6. Shall provide individual audio output muting
5. Switching and Processing Requirements
  1. Shall support switching between input sources using front panel buttons
  2. Shall provide multiple effects for transitioning between Preview and Program outputs
    1. Wipes in four directions and of selectable duration
    2. Selectable hard/soft wipe edge
    3. Dissolve with selectable duration
    4. Seamless Cut
  3. Shall allow any input image to be displayed on-screen simultaneously with another image for picture-in-picture – PIP display and allow:
    1. Dynamic sizing of window
    2. Window positioning at any X:Y coordinate
    3. Transitioning into or out of the image using the dissolve effect
  4. Shall provide sixteen (16) PIP presets
  5. Shall allow title information or other input source content to be keyed over the program image
  6. Shall allow a logo graphic to be positioned and keyed over live video
    1. Upload of a .BMP, .JPG, .PNG, or .TIFF format logo graphic
    2. Selectable full screen image display in resolutions up to 4K/60
  7. Shall allow storage for up to sixteen (16) logo images
  8. Shall allow a selectable transparency level to be applied to a logo image or graphic
  9. Shall provide motion-adaptive deinterlacing for signals up to 1080i
  10. Shall provide aspect ratio control
    1. When in FILL mode, the video image on the output screen shall always fill the output screen without letterbox or pillar box
    2. When in FOLLOW mode, the video image on the output screen shall always preserve the original aspect ratio of the input signals
  11. Shall provide storage and recall of video parameters and picture settings
    1. Automatic memories for each video input
      1. Save video settings and picture adjustments without user intervention
      2. Automatically recall settings when the same video rate is encountered
    2. Layout presets
      1. Save picture adjustments, transition effect settings and duration, window size and position, video key settings, logo preset, background image, and Preview input
      2. Save and recall layout presets using front panel controls
      3. Save and recall layout presents electronically via RS-232, Ethernet, or USB connection
    3. Manual input presets
      1. Save video settings and picture adjustments
      2. Save and recall input presets using front panel controls
      3. Save and recall input presents electronically via RS-232, Ethernet, or USB connection
  12. Shall provide automatic 3:2 and 2:2 pulldown detection
6. EDID Communication Requirements
  1. Shall include technology to automatically manage EDID communication between connected devices
    1. Maintain continuous EDID communication with the connected sources
    2. User-selection of EDID from a remotely connected display
    3. User-selection of EDID from pre-stored data files
7. HDCP Requirements - HDMI inputs
  1. Shall be HDCP 2.3 compliant
  2. Shall provide an option to disable HDCP processing at an HDMI input connection when passing unencrypted content
  3. Shall include technology to authenticate and maintain continuous HDCP encryption and key exchange between connected devices
  4. Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is sent to a non-HDCP compliant display
    1. When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
    2. When disabled, the output shall be muted
  5. Shall provide real-time verification of HDCP status for HDMI inputs and outputs
    1. Electronically accessible over RS-232, Ethernet, or USB connection
    2. Status information available on front panel LCD display
8. Control Requirements
  1. Shall provide one (1) female mini USB port on front panel for configuration and setup
  2. Shall provide lockout mode to restrict access to controls
  3. Shall provide alternatives for configuration and operation
    1. Back-lit buttons with LCD menu display on front panel
    2. Rotary dials on front panel for image adjustment and positioning
    3. On-screen menus navigated using front panel controls
    4. Product configuration software connected via Ethernet or USB
    5. Serial commands sent over Ethernet, RS-232 or USB connection
  4. Shall provide one (1) RJ-45 connector on rear panel for LAN connection
  5. Shall provide one (1) bidirectional RS-232 3-pole captive screw connector on rear panel for RS-232 control
9. Outboard Switching Requirements
  1. Shall allow two (2) HDMI inputs to cause a connected matrix switcher with HDMI outputs to emulate a seamless switcher
10. Power Requirements
  1. Shall be equipped with an internal, universal AC power supply with a seven- (7) year parts and labor warranty
11. General Requirements
  1. Shall provide internal video test patterns and pink noise generator for calibration and setup of display devices
  2. Shall provide visual signal on LED indicators located on rear panel for link status
  3. Shall have a 2U high, full rack width metal enclosure
  4. Shall be rack mountable
  5. Shall include Extron LockIt® HDMI cable lacing brackets
  6. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Product appropriate RoHS and WEEE
  8. Shall provide at least three (3) years parts and labor warranty
12. Approved device shall be the ISS 612 (60-1685-01); no alternates or equals

ISS 608

Provide a seamless switcher that shall support video resolutions up to 4K @ 60 Hz over HDMI and DisplayPort inputs from multiple sources to Program and Preview HDMI outputs
1. Rack-mountable switcher for HDMI and DisplayPort source signals with or without embedded audio
2. Video Input Requirements
  1. Shall provide six (6) female HDMI Type A connectors for digital video signals
  2. Shall provide two (2) female DisplayPort connectors for digital video signals
  3. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
3. Video Output Requirements
  1. Shall provide two (2) female HDMI type-A connectors
  2. Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
  3. Shall support custom user-defined output resolutions via EDID management
  4. Shall provide two (2) independent video buses that shall enable the operator to view video prior to audience display
    1. One (1) Preview output
    2. One (1) Program output
  5. Shall provide picture controls for brightness, contrast, and detail, as well as horizontal and vertical sizing, positions, and zoom for both Preview and Program output buses
  6. Shall provide upscaling and downscaling of input sources with 30-bit precision processing and 4:4:4 color bandwidth
  7. Shall provide video format conversion
  8. Shall allow one or both video outputs to be muted
  9. Shall allow one or both video output images to be frozen
4. Audio Management Requirements
  1. Shall switch embedded multi-channel HDMI and DisplayPort audio, along with video, to the Preview and Program HDMI outputs.
  2. Shall provide two (2) 3.5 mm 5-pole captive screw connectors for Preview and Program audio output
    1. Stereo/mono
    2. Balanced/unbalanced
  3. Shall provide audio extraction of HDMI and DisplayPort two-channel audio to the Preview and Program analog audio outputs
  4. Shall provide audio extraction of HDMI and DisplayPort multi-channel audio to the Program analog audio output
  5. Shall provide unity gain from input to output
  6. Shall provide individual audio output muting
5. Switching and Processing Requirements
  1. Shall support switching between input sources using front panel buttons
  2. Shall provide multiple effects for transitioning between Preview and Program outputs
    1. Wipes in four directions and of selectable duration
    2. Selectable hard/soft wipe edge
    3. Dissolve with selectable duration
    4. Seamless Cut
  3. Shall allow any input image to be displayed on-screen simultaneously with another image for picture-in-picture – PIP display and allow:
    1. Dynamic sizing of window
    2. Window positioning at any X:Y coordinate
    3. Transitioning into or out of the image using the dissolve effect
  4. Shall provide sixteen (16) PIP presets
  5. Shall allow title information or other input source content to be keyed over the program image
  6. Shall allow a logo graphic to be positioned and keyed over live video
    1. Upload of a .BMP, .JPG, .PNG, or .TIFF format logo graphic
    2. Selectable full screen image display in resolutions up to 4K/60
  7. Shall allow storage for up to sixteen (16) logo images
  8. Shall allow a selectable transparency level to be applied to a logo image or graphic
  9. Shall provide motion-adaptive deinterlacing for signals up to 1080i
  10. Shall provide aspect ratio control
    1. When in FILL mode, the video image on the output screen shall always fill the output screen without letterbox or pillar box
    2. When in FOLLOW mode, the video image on the output screen shall always preserve the original aspect ratio of the input signals
  11. Shall provide storage and recall of video parameters and picture settings
    1. Automatic memories for each video input
      1. Save video settings and picture adjustments without user intervention
      2. Automatically recall settings when the same video rate is encountered
    2. Layout presets
      1. Save picture adjustments, transition effect settings and duration, window size and position, video key settings, logo preset, background image, and Preview input
      2. Save and recall layout presets using front panel controls
      3. Save and recall layout presents electronically via RS-232, Ethernet, or USB connection
    3. Manual input presets
      1. Save video settings and picture adjustments
      2. Save and recall input presets using front panel controls
      3. Save and recall input presents electronically via RS-232, Ethernet, or USB connection
  12. Shall provide automatic 3:2 and 2:2 pulldown detection
6. EDID Communication Requirements
  1. Shall include technology to automatically manage EDID communication between connected devices
    1. Maintain continuous EDID communication with the connected sources
    2. User-selection of EDID from a remotely connected display
    3. User-selection of EDID from pre-stored data files
7. HDCP Requirements - HDMI inputs
  1. Shall be HDCP 2.3 compliant
  2. Shall provide an option to disable HDCP processing at an HDMI input connection when passing unencrypted content
  3. Shall include technology to authenticate and maintain continuous HDCP encryption and key exchange between connected devices
  4. Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is sent to a non-HDCP compliant display
    1. When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
    2. When disabled, the output shall be muted
  5. Shall provide real-time verification of HDCP status for HDMI inputs and outputs
    1. Electronically accessible over RS-232, Ethernet, or USB connection
    2. Status information available on front panel LCD display
8. Control Requirements
  1. Shall provide one (1) female mini USB port on front panel for configuration and setup
  2. Shall provide lockout mode to restrict access to controls
  3. Shall provide alternatives for configuration and operation
    1. Back-lit buttons with LCD menu display on front panel
    2. Rotary dials on front panel for image adjustment and positioning
    3. On-screen menus navigated using front panel controls
    4. Product configuration software connected via Ethernet or USB
    5. Serial commands sent over Ethernet, RS-232 or USB connection
  4. Shall provide one (1) RJ-45 connector on rear panel for LAN connection
  5. Shall provide one (1) bidirectional RS-232 3-pole captive screw connector on rear panel for RS-232 control
9. Outboard Switching Requirements
  1. Shall allow two (2) HDMI inputs to cause a connected matrix switcher with HDMI outputs to emulate a seamless switcher
10. Power Requirements
  1. Shall be equipped with an internal, universal AC power supply with a seven- (7) year parts and labor warranty
11. General Requirements
  1. Shall provide internal video test patterns and pink noise generator for calibration and setup of display devices
  2. Shall provide visual signal on LED indicators located on rear panel for link status
  3. Shall have a 2U high, full rack width metal enclosure
  4. Shall be rack mountable
  5. Shall include Extron LockIt® HDMI cable lacing brackets
  6. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Product appropriate RoHS and WEEE
  8. Shall provide at least three (3) years parts and labor warranty
12. Approved device shall be the ISS 608 (60-1684-01); no alternates or equals

ISS 608

Provide a seamless switcher that shall support video resolutions up to 4K @ 60 Hz over HDMI and DisplayPort inputs from multiple sources to Program and Preview HDMI outputs
1. Rack-mountable switcher for HDMI and DisplayPort source signals with or without embedded audio
2. Video Input Requirements
  1. Shall provide six (6) female HDMI Type A connectors for digital video signals
  2. Shall provide two (2) female DisplayPort connectors for digital video signals
  3. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
3. Video Output Requirements
  1. Shall provide two (2) female HDMI type-A connectors
  2. Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
  3. Shall support custom user-defined output resolutions via EDID management
  4. Shall provide two (2) independent video buses that shall enable the operator to view video prior to audience display
    1. One (1) Preview output
    2. One (1) Program output
  5. Shall provide picture controls for brightness, contrast, and detail, as well as horizontal and vertical sizing, positions, and zoom for both Preview and Program output buses
  6. Shall provide upscaling and downscaling of input sources with 30-bit precision processing and 4:4:4 color bandwidth
  7. Shall provide video format conversion
  8. Shall allow one or both video outputs to be muted
  9. Shall allow one or both video output images to be frozen
4. Audio Management Requirements
  1. Shall switch embedded multi-channel HDMI and DisplayPort audio, along with video, to the Preview and Program HDMI outputs.
  2. Shall provide two (2) 3.5 mm 5-pole captive screw connectors for Preview and Program audio output
    1. Stereo/mono
    2. Balanced/unbalanced
  3. Shall provide audio extraction of HDMI and DisplayPort two-channel audio to the Preview and Program analog audio outputs
  4. Shall provide audio extraction of HDMI and DisplayPort multi-channel audio to the Program analog audio output
  5. Shall provide unity gain from input to output
  6. Shall provide individual audio output muting
5. Switching and Processing Requirements
  1. Shall support switching between input sources using front panel buttons
  2. Shall provide multiple effects for transitioning between Preview and Program outputs
    1. Wipes in four directions and of selectable duration
    2. Selectable hard/soft wipe edge
    3. Dissolve with selectable duration
    4. Seamless Cut
  3. Shall allow any input image to be displayed on-screen simultaneously with another image for picture-in-picture – PIP display and allow:
    1. Dynamic sizing of window
    2. Window positioning at any X:Y coordinate
    3. Transitioning into or out of the image using the dissolve effect
  4. Shall provide sixteen (16) PIP presets
  5. Shall allow title information or other input source content to be keyed over the program image
  6. Shall allow a logo graphic to be positioned and keyed over live video
    1. Upload of a .BMP, .JPG, .PNG, or .TIFF format logo graphic
    2. Selectable full screen image display in resolutions up to 4K/60
  7. Shall allow storage for up to sixteen (16) logo images
  8. Shall allow a selectable transparency level to be applied to a logo image or graphic
  9. Shall provide motion-adaptive deinterlacing for signals up to 1080i
  10. Shall provide aspect ratio control
    1. When in FILL mode, the video image on the output screen shall always fill the output screen without letterbox or pillar box
    2. When in FOLLOW mode, the video image on the output screen shall always preserve the original aspect ratio of the input signals
  11. Shall provide storage and recall of video parameters and picture settings
    1. Automatic memories for each video input
      1. Save video settings and picture adjustments without user intervention
      2. Automatically recall settings when the same video rate is encountered
    2. Layout presets
      1. Save picture adjustments, transition effect settings and duration, window size and position, video key settings, logo preset, background image, and Preview input
      2. Save and recall layout presets using front panel controls
      3. Save and recall layout presents electronically via RS-232, Ethernet, or USB connection
    3. Manual input presets
      1. Save video settings and picture adjustments
      2. Save and recall input presets using front panel controls
      3. Save and recall input presents electronically via RS-232, Ethernet, or USB connection
  12. Shall provide automatic 3:2 and 2:2 pulldown detection
6. EDID Communication Requirements
  1. Shall include technology to automatically manage EDID communication between connected devices
    1. Maintain continuous EDID communication with the connected sources
    2. User-selection of EDID from a remotely connected display
    3. User-selection of EDID from pre-stored data files
7. HDCP Requirements - HDMI inputs
  1. Shall be HDCP 2.3 compliant
  2. Shall provide an option to disable HDCP processing at an HDMI input connection when passing unencrypted content
  3. Shall include technology to authenticate and maintain continuous HDCP encryption and key exchange between connected devices
  4. Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is sent to a non-HDCP compliant display
    1. When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
    2. When disabled, the output shall be muted
  5. Shall provide real-time verification of HDCP status for HDMI inputs and outputs
    1. Electronically accessible over RS-232, Ethernet, or USB connection
    2. Status information available on front panel LCD display
8. Control Requirements
  1. Shall provide one (1) female mini USB port on front panel for configuration and setup
  2. Shall provide lockout mode to restrict access to controls
  3. Shall provide alternatives for configuration and operation
    1. Back-lit buttons with LCD menu display on front panel
    2. Rotary dials on front panel for image adjustment and positioning
    3. On-screen menus navigated using front panel controls
    4. Product configuration software connected via Ethernet or USB
    5. Serial commands sent over Ethernet, RS-232 or USB connection
  4. Shall provide one (1) RJ-45 connector on rear panel for LAN connection
  5. Shall provide one (1) bidirectional RS-232 3-pole captive screw connector on rear panel for RS-232 control
9. Outboard Switching Requirements
  1. Shall allow two (2) HDMI inputs to cause a connected matrix switcher with HDMI outputs to emulate a seamless switcher
10. Power Requirements
  1. Shall be equipped with an internal, universal AC power supply with a seven- (7) year parts and labor warranty
11. General Requirements
  1. Shall provide internal video test patterns and pink noise generator for calibration and setup of display devices
  2. Shall provide visual signal on LED indicators located on rear panel for link status
  3. Shall have a 2U high, full rack width metal enclosure
  4. Shall be rack mountable
  5. Shall include Extron LockIt® HDMI cable lacing brackets
  6. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  7. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Product appropriate RoHS and WEEE
  8. Shall provide at least three (3) years parts and labor warranty
12. Approved device shall be the ISS 608 (60-1684-01); no alternates or equals

Aggiungi articolo al carrello

Order Message Number

Codice articolo

Nota: I prodotti Extron che usano la presa AC universale accettano molti tipi di prese AC diversi. Prima dell’uso, si assicuri che il dispositivo soddisfi tutti i requisiti normativi per la sua regione e sia conforme con i codici e gli standard locali di sicurezza ed elettrici applicabili.

Q.tà

Totale attuale:

Visualizza carrello

ISS 612 -

Dettagli del prodotto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Condividi l'articolo via e-mail

ISS 612

Switcher HDMI, DisplayPort e 12G-SDI 4K/60 con commutazione completa

Invia a: *

La preghiamo di inserire un indirizzo e-mail valido.

Messaggio:

( caratteri rimanenti)

Inviami una copia

Grazie. Il messaggio è stato inviato.

Si è verificato un errore durante l'invio del messaggio. Riprovare più tardi.