Home prodotti
Controller MediaLink Plus
Serie MLC 60
MLC Plus 50 Serie MLC Plus 84 Serie MLC Plus 100 Serie MLC Plus 200 MLC Plus 400 Serie MLC 55 Accessori MediaLink Plus Accessori per controller MediaLink Software Utility App Driver Firmware
MLC 62 RS CC
MLC 62 RS CC MLC 62 RS D MLC 62 RS EU MLC 62 RS MK MLC 64 RS VC D

Twitter Copia il link

Stampa

Pro

MLC 62 RS CC

Controller MediaLink per contenitori di accesso ai cavi Cable Cubby

Caratteristiche principali

Progettato per il montaggio nella maggior parte dei contenitori Cable Cubby^®
Pulsanti retroilluminati personalizzabili
Apertura MAAP a due spazi per pass-through cavi o connettività AV
Comoda placca pass-through forata con tre anelli aperti
Porte RS-232 unidirezionale e IR configurabili per controllo universale dei display
Due relè
Tutte le caratteristiche

Previous Next

Galleria immagini

Panoramica interattiva

Descrizioni per consulenti

Personalizza il prodotto

Configuratore per sistemi Cable Cubby
Configuratore pulsanti personalizzati

Panoramica
Video
Descrizione
Specifiche
Diagramma
Pannello illustrativo
Download

Panoramica

MLC 62 RS CC di Extron è un controller MediaLink^® alloggiato in una staffa di montaggio versatile progettata per l'integrazione nei contenitori di accesso ai cavi Cable Cubby^®. Questo controller intuitivo con tastierino offre funzioni di controllo AV fra le più comuni, come alimentazione, commutazione input e volume. È caratterizzato da otto pulsanti soft touch retroilluminati e da varie porte di controllo, fra cui RS-232 seriale e IR per controllo universale dei display, due relè per controllare illuminazione, impostazione degli schermi e altre funzioni dei dispositivi, e un input digitale. Una pratica placca passacavo con anelli aperti offre accesso ai cavi dal contenitore Cable Cubby.

Video

Descrizione

Specifiche

Diagramma

Pannello illustrativo

Download

Prodotti visionati di recente

MLC 62 RS CC

Descrizioni per consulenti

Selezionare un codice articolo:

Select a Part Number:

Copia testo Copiato Si è verificato un errore. Riprovare più tardi.

MLC 62 RS CC

Provide a 55mm x 55mm button panel controller housed in a versatile mounting bracket designed to integrate into Cable Cubby® 1200 or Cable Cubby 1400 Series/2 Cable Access Enclosures for the purpose for switching and control of AV equipment
1. Mountable button panel controller for AV and control systems
  1. Device shall have a total of eight fully configurable soft touch LED backlit buttons, four dedicated for input selection, two dedicated for volume control and the remaining two dedicated for power control arranged in a logical order
    1. Buttons shall illuminate white when active and should have the ability to flash
    2. Input source buttons shall be able to be configured for either a single or dual function setup by simply swapping out the bezel and buttons with an included bezel kit
    3. Button text shall be able to be customized by selected from pre-packaged kits or may be ordered individually
  2. Device shall have five LEDs, arranged horizontally located just above the volume buttons that shall provide visual feedback of the volume level in a system
  3. Device shall support the creation of IR drivers by capturing IR commands from handheld remotes. IR receiver shall be located on the left side of the controller
  4. Device shall feature a mini female USB B Port that shall be located on the left side of the controller that shall allow for device configuration
  5. Device shall feature a host port on captive screw connectors located on the back of the panel for that shall allow for device configuration
  6. Device shall support one digital input on captive screw connector located on the back of the controller that can be used to interface with devices such as sensors, switches, and relays
  7. Device shall have two normally open low voltage relays on captive screw connectors that can be configured to control lighting, screen control or other device functions
  8. Device shall have one configurable IR/Serial ports on captive screw connectors located on the back of the controller. This ports shall allow the transmission of IR signals (using an IR emitter) or unidirectional RS-232 communications for control of AV system components
  9. Device shall have a configurable unidirectional RS-232 port on captive screw connectors located on the back of the panel for universal display control
  10. Device shall have a 12 volt captive screw connection located on the back of the panel that will be used to power the panel using an included universal power supply
  11. Device shall provide audible feedback from the built-in speaker by beeping when a button is pressed
  12. Device shall include a mounting bracket designed to mount in a Cable Cubby® 1200 or Cable Cubby 1400 Series/2 Cable Access Enclosure
    1. Mounting bracket shall include a two-space MAAP opening for cable pass-through or AV connectivity
  13. Device shall include a flexible two-space MAAP cable pass through plate with three split-ring holes one small 0.25” (.64 cm) and two medium 0.375” (.95 cm)
  14. Device shall be Section 508 Compliant and shall meet or exceed accessibility standards for Electronic Information Technology
  15. Device shall include black face plate
  16. Device shall ship with an optional six button bezel kit and additional buttons should the user need only two source/function buttons instead of four
    1. ON/OFF
    2. Volume up/Volume down represented by speaker symbols
    3. PC/Video
    4. LAPTOP/MUTE
    5. PC
    6. VIDEO
2. Mounting requirements
  1. Device shall be able to mount directly into Cable Cubby® 1200 or Cable Cubby 1400 Series/2 Cable Access Enclosures
3. Software requirements
  1. Device shall be configured using MLC 55, 62 and 64 Series Configuration software
4. Shall meet regulatory compliances
  1. CE
  2. c-UL
  3. UL
  4. C-tick
  5. FCC Class A
  6. ICES
  7. VCCI Class A
5. Product Warranty
  1. Shall provide at least 3 years parts and labor
6. Approved device shall be the Extron MLC 62 RS CC, part number 60-1005-52; no alternates or equals

MLC 62 RS CC

Provide a 55mm x 55mm button panel controller housed in a versatile mounting bracket designed to integrate into Cable Cubby® 1200 or Cable Cubby 1400 Series/2 Cable Access Enclosures for the purpose for switching and control of AV equipment
1. Mountable button panel controller for AV and control systems
  1. Device shall have a total of eight fully configurable soft touch LED backlit buttons, four dedicated for input selection, two dedicated for volume control and the remaining two dedicated for power control arranged in a logical order
    1. Buttons shall illuminate white when active and should have the ability to flash
    2. Input source buttons shall be able to be configured for either a single or dual function setup by simply swapping out the bezel and buttons with an included bezel kit
    3. Button text shall be able to be customized by selected from pre-packaged kits or may be ordered individually
  2. Device shall have five LEDs, arranged horizontally located just above the volume buttons that shall provide visual feedback of the volume level in a system
  3. Device shall support the creation of IR drivers by capturing IR commands from handheld remotes. IR receiver shall be located on the left side of the controller
  4. Device shall feature a mini female USB B Port that shall be located on the left side of the controller that shall allow for device configuration
  5. Device shall feature a host port on captive screw connectors located on the back of the panel for that shall allow for device configuration
  6. Device shall support one digital input on captive screw connector located on the back of the controller that can be used to interface with devices such as sensors, switches, and relays
  7. Device shall have two normally open low voltage relays on captive screw connectors that can be configured to control lighting, screen control or other device functions
  8. Device shall have one configurable IR/Serial ports on captive screw connectors located on the back of the controller. This ports shall allow the transmission of IR signals (using an IR emitter) or unidirectional RS-232 communications for control of AV system components
  9. Device shall have a configurable unidirectional RS-232 port on captive screw connectors located on the back of the panel for universal display control
  10. Device shall have a 12 volt captive screw connection located on the back of the panel that will be used to power the panel using an included universal power supply
  11. Device shall provide audible feedback from the built-in speaker by beeping when a button is pressed
  12. Device shall include a mounting bracket designed to mount in a Cable Cubby® 1200 or Cable Cubby 1400 Series/2 Cable Access Enclosure
    1. Mounting bracket shall include a two-space MAAP opening for cable pass-through or AV connectivity
  13. Device shall include a flexible two-space MAAP cable pass through plate with three split-ring holes one small 0.25” (.64 cm) and two medium 0.375” (.95 cm)
  14. Device shall be Section 508 Compliant and shall meet or exceed accessibility standards for Electronic Information Technology
  15. Device shall include black face plate
  16. Device shall ship with an optional six button bezel kit and additional buttons should the user need only two source/function buttons instead of four
    1. ON/OFF
    2. Volume up/Volume down represented by speaker symbols
    3. PC/Video
    4. LAPTOP/MUTE
    5. PC
    6. VIDEO
2. Mounting requirements
  1. Device shall be able to mount directly into Cable Cubby® 1200 or Cable Cubby 1400 Series/2 Cable Access Enclosures
3. Software requirements
  1. Device shall be configured using MLC 55, 62 and 64 Series Configuration software
4. Shall meet regulatory compliances
  1. CE
  2. c-UL
  3. UL
  4. C-tick
  5. FCC Class A
  6. ICES
  7. VCCI Class A
5. Product Warranty
  1. Shall provide at least 3 years parts and labor
6. Approved device shall be the Extron MLC 62 RS CC, part number 60-1005-52; no alternates or equals

Aggiungi articolo al carrello

Order Message Number

Codice articolo

Nota: I prodotti Extron che usano la presa AC universale accettano molti tipi di prese AC diversi. Prima dell’uso, si assicuri che il dispositivo soddisfi tutti i requisiti normativi per la sua regione e sia conforme con i codici e gli standard locali di sicurezza ed elettrici applicabili.

Q.tà

Totale attuale:

Visualizza carrello

MLC 62 RS CC -

Dettagli del prodotto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Condividi l'articolo via e-mail

MLC 62 RS CC

Controller MediaLink per contenitori di accesso ai cavi Cable Cubby

Invia a: *

La preghiamo di inserire un indirizzo e-mail valido.

Messaggio:

( caratteri rimanenti)

Inviami una copia

Grazie. Il messaggio è stato inviato.

Si è verificato un errore durante l'invio del messaggio. Riprovare più tardi.