Home prodotti
AV over IP – Sistemi NAV
AV over IP professionale NAV
Encoder Decoder System Manager Switch convalidati
NAV 10E 501
NAV 10E 101 NAV 10E 201 D NAV 10E 401 D NAV 10E 501 NAV E 101 NAV E 101 DTP NAV E 201 D NAV E 401 D NAV E 501 NAV E 511

Stampare

Pro

NAV 10E 501

Encoder AV over IP professionale da 10G - HDMI, Ethernet e USB

Caratteristiche principali

Nuovo Funzionalità AES67 ampliate consentono a qualsiasi encoder o decoder NAV di trasmettere o ricevere un flusso audio AES67
Nuovo Funzione Confidence Preview disponibile per anteprima di controllo nell'endpoint o nell'interfaccia su browser di NAVigator
Stazione di lavoro AV over IP professionale NAV
Commutazione KVM SmartGlide™
Evidenziazione KVM SmartGlide
Codifica e invia in streaming segnali video, audio, Ethernet e USB su reti Ethernet 10 Gbps
Tutte le caratteristiche

Previous Next

Galleria immagini

Panoramica interattiva

Video in primo piano

Premi

Premi 2021 Reader's Choice Awards di AVNation
AVNation Best of 2020 Award
Best of Show at NAB Show 2019

Caratteristiche a confronto

Switch convalidati

Descrizioni per consulenti

Casi studio esemplificativi

Panoramica
Video
Descrizione
Specifiche
Diagramma
Pannello illustrativo
Download

Panoramica

NAV 10E 501 è un encoder AV over IP di livello professionale che invia in streaming segnali video, audio, Ethernet e USB 2.0 di qualità elevata a latenza ultra‑bassa su reti Ethernet 10 Gbps a bit rate ridotti. Utilizzando il codec PURE3^® brevettato di Extron, l'encoder garantisce prestazioni rivoluzionarie con video in tempo reale senza perdite visive fino a risoluzioni 4K/60 Hz con campionamento cromatico 4:4:4 e latenza ultra bassa. Impostazioni regolabili dei bit rate supportano la compatibilità con endpoint NAV^® da 1 Gbps, per maggiore scalabilità e installazioni più ampie. Il supporto dello standard Audio over IP AES67 agevola un'integrazione flessibile con i processori DSP della serie DMP Plus o altri componenti audio con supporto IP. Progettata appositamente per il supporto di applicazioni AV professionali complesse, la potente piattaforma NAV è facilmente espandibile e consente un invio sicuro dei segnali AV verso migliaia di endpoint.

Video

Descrizione

Specifiche

Diagramma

Pannello illustrativo

Download

Prodotti visionati di recente

NAV 10E 501

Descrizioni per consulenti

Selezionare un codice articolo:

Select a Part Number:

Copia testo Copiato Si è verificato un errore. Riprovare più tardi.

NAV 10E 501 (multimode)

Provide a Pro AV over IP encoder that streams ultra-low latency, high quality audio, video, Ethernet, and USB 2.0 signals over 10 Gbit fiber optic Ethernet networks
1. Encode audio, video, Ethernet, and USB 2.0
  1. Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
  2. Provide connections for interfacing analog audio signals
    1. One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio input
  3. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  4. Provide a 2-pole captive screw connector for Contact closure and Tally output
  5. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  6. Provide one LC fiber optic connector for control and transport of streaming data over multimode fiber optic cable for distances up to 1312 feet (400 m)
  7. LC connector shall also support Ethernet extension for remote LAN connectivity over multimode fiber optic cable
  8. Provide one 2-pole captive screw connector for 12VDC power
  9. Provide twelve LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. HDMI LED on front panel to indicate HDMI input signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. HDMI audio LED on front panel to indicate HDMI audio input status
    5. Analog audio LED on front panel to indicate analog audio input status
    6. Stream LED on front panel to indicate streaming status
    7. Two LAN LEDs on front panel to indicate network link/activity status
    8. Two LAN LEDs on back panel to indicate network link/activity status
    9. ID LED on front panel for visual confirmation of units on the network
    10. Reset LED on back panel to indicate reset status
  10. Provide an ID button on the front panel to identify the unit on the network
  11. Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
  12. Provide a USB Type-C interface configurable as Host or Hub for USB 1.1 and 2.0 extension with speed up to 480 Mbps
  13. Support Interrupt type (HID), bulk transfer (storage) or Isochronous (camera and Microphones) USB devices
  14. Support audio streaming between encoder and decoder
  15. Support streaming of HDCP-encrypted sources to decoders connected to HDCP-compliant displays
  16. Maintain continuous HDCP-encryption between the source and encoder
  17. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  18. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  19. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
  20. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  21. Support HDMI embedded and analog stereo audio
  22. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  23. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  24. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  25. Support a low delay, encode and decode process
  26. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  27. Support IGMPv3multicast per RFC 3376
  28. Support RTP transport type per RFC 1889
  29. Support 802.1x port-based Network Access Control (PNAC)
  30. Support audio and USB breakaway
  31. Support Audio only streaming with a blackburst signal
  32. Support AES67 audio streaming
  33. Support VLAN tagging
  34. Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
  35. Support SRTP encryption of AV and data stream
  36. Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network (external Ethernet switch performs electrical/optical physical layer conversion)
  37. Support creation of user defined device names
  38. Support configuration and control from an embedded web browser
  39. Support optional on-screen messaging for device identification.
  40. Support matrix switching between multiple encoders or decoders
  41. Support transmission of lower bitrate video to 1 Gbit decoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
  42. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  43. Support encoding and decoding audio and video at bit rates adjustable from 150 Mbps to 8.5 Gbps
  44. Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  45. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure.
3. Approved device shall be the Extron NAV 10E 501 (60-1572-04; no alternates or equals)

NAV 10E 501 (multimode)

Provide a Pro AV over IP encoder that streams ultra-low latency, high quality audio, video, Ethernet, and USB 2.0 signals over 10 Gbit fiber optic Ethernet networks
1. Encode audio, video, Ethernet, and USB 2.0
  1. Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
  2. Provide connections for interfacing analog audio signals
    1. One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio input
  3. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  4. Provide a 2-pole captive screw connector for Contact closure and Tally output
  5. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  6. Provide one LC fiber optic connector for control and transport of streaming data over multimode fiber optic cable for distances up to 1312 feet (400 m)
  7. LC connector shall also support Ethernet extension for remote LAN connectivity over multimode fiber optic cable
  8. Provide one 2-pole captive screw connector for 12VDC power
  9. Provide twelve LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. HDMI LED on front panel to indicate HDMI input signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. HDMI audio LED on front panel to indicate HDMI audio input status
    5. Analog audio LED on front panel to indicate analog audio input status
    6. Stream LED on front panel to indicate streaming status
    7. Two LAN LEDs on front panel to indicate network link/activity status
    8. Two LAN LEDs on back panel to indicate network link/activity status
    9. ID LED on front panel for visual confirmation of units on the network
    10. Reset LED on back panel to indicate reset status
  10. Provide an ID button on the front panel to identify the unit on the network
  11. Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
  12. Provide a USB Type-C interface configurable as Host or Hub for USB 1.1 and 2.0 extension with speed up to 480 Mbps
  13. Support Interrupt type (HID), bulk transfer (storage) or Isochronous (camera and Microphones) USB devices
  14. Support audio streaming between encoder and decoder
  15. Support streaming of HDCP-encrypted sources to decoders connected to HDCP-compliant displays
  16. Maintain continuous HDCP-encryption between the source and encoder
  17. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  18. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  19. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
  20. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  21. Support HDMI embedded and analog stereo audio
  22. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  23. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  24. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  25. Support a low delay, encode and decode process
  26. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  27. Support IGMPv3multicast per RFC 3376
  28. Support RTP transport type per RFC 1889
  29. Support 802.1x port-based Network Access Control (PNAC)
  30. Support audio and USB breakaway
  31. Support Audio only streaming with a blackburst signal
  32. Support AES67 audio streaming
  33. Support VLAN tagging
  34. Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
  35. Support SRTP encryption of AV and data stream
  36. Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network (external Ethernet switch performs electrical/optical physical layer conversion)
  37. Support creation of user defined device names
  38. Support configuration and control from an embedded web browser
  39. Support optional on-screen messaging for device identification.
  40. Support matrix switching between multiple encoders or decoders
  41. Support transmission of lower bitrate video to 1 Gbit decoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
  42. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  43. Support encoding and decoding audio and video at bit rates adjustable from 150 Mbps to 8.5 Gbps
  44. Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  45. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure.
3. Approved device shall be the Extron NAV 10E 501 (60-1572-04; no alternates or equals)

NAV 10E 501 (singlemode)

Provide a Pro AV over IP encoder that streams ultra-low latency, high quality audio, video, Ethernet, and USB 2.0 signals over 10 Gbit fiber optic Ethernet networks
1. Encode audio, video, Ethernet, and USB 2.0
  1. Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
  2. Provide connections for interfacing analog audio signals
    1. One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio input
  3. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  4. Provide a 2-pole captive screw connector for Contact closure and Tally output
  5. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  6. Provide one LC fiber optic connector for control and transport of streaming data over singlemode fiber optic cable for distances up to 6.2 miles (10 km)
  7. LC connector shall also support Ethernet extension for remote LAN connectivity over singlemode fiber optic cable
  8. Provide one 2-pole captive screw connector for 12VDC power
  9. Provide twelve LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. HDMI LED on front panel to indicate HDMI input signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. HDMI audio LED on front panel to indicate HDMI audio input status
    5. Analog audio LED on front panel to indicate analog audio input status
    6. Stream LED on front panel to indicate streaming status
    7. Two LAN LEDs on front panel to indicate network link/activity status
    8. Two LAN LEDs on back panel to indicate network link/activity status
    9. ID LED on front panel for visual confirmation of units on the network
    10. Reset LED on back panel to indicate reset status
  10. Provide an ID button on the front panel to identify the unit on the network
  11. Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
  12. Provide a USB Type-C interface configurable as Host or Hub for USB 1.1 and 2.0 extension with speed up to 480 Mbps
  13. Support Interrupt type (HID), bulk transfer (storage) or Isochronous (camera and Microphones) USB devices
  14. Support audio streaming between encoder and decoder
  15. Support streaming of HDCP-encrypted sources to decoders connected to HDCP-compliant displays
  16. Maintain continuous HDCP-encryption between the source and encoder
  17. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  18. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  19. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x2160), and 4K (4096 x 2160) @ 60 Hz
  20. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  21. Support HDMI embedded and analog stereo audio
  22. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  23. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  24. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  25. Support a low delay, encode and decode process
  26. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  27. Support IGMPv3multicast per RFC 3376
  28. Support RTP transport type per RFC 1889
  29. Support 802.1x port-based Network Access Control (PNAC)
  30. Support audio and USB breakaway
  31. Support Audio only streaming with a blackburst signal
  32. Support AES67 audio streaming
  33. Support VLAN tagging
  34. Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
  35. Support SRTP encryption of AV and data stream
  36. Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
  37. Support creation of user defined device names
  38. Support configuration and control from an embedded web browser
  39. Support optional on-screen messaging for device identification.
  40. Support matrix switching between multiple encoders or decoders
  41. Support transmission of lower bitrate video to 1 Gb decoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
  42. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  43. Support encoding and decoding audio and video at bit rates adjustable from 150 Mbps to 8.5 Gbps
  44. Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  45. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure.
3. Approved device shall be the Extron NAV 10E 501 (60-1572-05; no alternates or equals)

NAV 10E 501 (singlemode)

Provide a Pro AV over IP encoder that streams ultra-low latency, high quality audio, video, Ethernet, and USB 2.0 signals over 10 Gbit fiber optic Ethernet networks
1. Encode audio, video, Ethernet, and USB 2.0
  1. Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
  2. Provide connections for interfacing analog audio signals
    1. One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio input
  3. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  4. Provide a 2-pole captive screw connector for Contact closure and Tally output
  5. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  6. Provide one LC fiber optic connector for control and transport of streaming data over singlemode fiber optic cable for distances up to 6.2 miles (10 km)
  7. LC connector shall also support Ethernet extension for remote LAN connectivity over singlemode fiber optic cable
  8. Provide one 2-pole captive screw connector for 12VDC power
  9. Provide twelve LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. HDMI LED on front panel to indicate HDMI input signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. HDMI audio LED on front panel to indicate HDMI audio input status
    5. Analog audio LED on front panel to indicate analog audio input status
    6. Stream LED on front panel to indicate streaming status
    7. Two LAN LEDs on front panel to indicate network link/activity status
    8. Two LAN LEDs on back panel to indicate network link/activity status
    9. ID LED on front panel for visual confirmation of units on the network
    10. Reset LED on back panel to indicate reset status
  10. Provide an ID button on the front panel to identify the unit on the network
  11. Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
  12. Provide a USB Type-C interface configurable as Host or Hub for USB 1.1 and 2.0 extension with speed up to 480 Mbps
  13. Support Interrupt type (HID), bulk transfer (storage) or Isochronous (camera and Microphones) USB devices
  14. Support audio streaming between encoder and decoder
  15. Support streaming of HDCP-encrypted sources to decoders connected to HDCP-compliant displays
  16. Maintain continuous HDCP-encryption between the source and encoder
  17. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  18. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  19. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x2160), and 4K (4096 x 2160) @ 60 Hz
  20. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  21. Support HDMI embedded and analog stereo audio
  22. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  23. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  24. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  25. Support a low delay, encode and decode process
  26. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  27. Support IGMPv3multicast per RFC 3376
  28. Support RTP transport type per RFC 1889
  29. Support 802.1x port-based Network Access Control (PNAC)
  30. Support audio and USB breakaway
  31. Support Audio only streaming with a blackburst signal
  32. Support AES67 audio streaming
  33. Support VLAN tagging
  34. Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
  35. Support SRTP encryption of AV and data stream
  36. Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
  37. Support creation of user defined device names
  38. Support configuration and control from an embedded web browser
  39. Support optional on-screen messaging for device identification.
  40. Support matrix switching between multiple encoders or decoders
  41. Support transmission of lower bitrate video to 1 Gb decoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
  42. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  43. Support encoding and decoding audio and video at bit rates adjustable from 150 Mbps to 8.5 Gbps
  44. Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  45. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure.
3. Approved device shall be the Extron NAV 10E 501 (60-1572-05; no alternates or equals)

Aggiungi articolo al carrello

Order Message Number

Codice articolo

Nota: I prodotti Extron che usano la presa AC universale accettano molti tipi di prese AC diversi. Prima dell’uso, si assicuri che il dispositivo soddisfi tutti i requisiti normativi per la sua regione e sia conforme con i codici e gli standard locali di sicurezza ed elettrici applicabili.

Q.tà

Totale attuale:

Visualizza carrello

NAV 10E 501 -

Dettagli del prodotto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.