| AVT 100 |
|
| RF video input |
|---|
| Number/signal type | 1 radio frequency (RF) |
| Connectors | |
| NTSC model | 1 female F connector |
| PAL model | 1 female IEC 169-2, 75 ohm connector |
| Sensitivity | -20 to +20 dBmV |
| Frequency range | 55 MHz to 855 MHz |
| NTSC off air TV channels | 2 to 69 |
| Japan | 1-62 |
| NTSC CATV cable channels | 2 to 125 |
| Japan | 1-63 |
| PAL off air TV and cable channels |
| | 48 MHz to 855 MHz |
| Impedance | 75 ohms |
| Vertical frequency | |
| NTSC model | 60 Hz |
| PAL model | 50 Hz |
|
| Video output |
|---|
| Number/signal type | 1 composite video |
| Connectors | 1 BNC female |
| Nominal level | 1 Vp-p for composite video |
| Minimum/maximum levels | 0.4 V to 1.0 Vp-p (follows input) |
| Impedance | 75 ohms |
| DC offset | ±10 mV with input at 0 offset |
|
| Sync |
|---|
| Standards | |
| NTSC model | NTSC 3.58 |
| International model | PAL |
|
| Audio |
|---|
| THD + Noise | NTSC: 0.4% @ 1 kHz
PAL: 0.6% @ 1 kHz |
| S/N | NTSC: -55 dB @ 1 kHz
PAL: -58 dB @ 1 kHz |
| Stereo channel separation | >35 dB @ 1 kHz |
|
| RF audio input |
|---|
| Number/signal type | 1 (as part of the RF signal) |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output |
|---|
| Number/signal type | 1 balanced/unbalanced;
stereo for NTSC, PAL B/G, PAL D/K;
mono only for PAL I |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ± 0.5 dB channel to channel |
| Nominal level | 0 dBu |
| Output level | 1 Vrms (max.) |
|
| Control/remote — tuner |
|---|
| Serial control port | RS-232; 3.5 mm captive screw connector, 5 pole |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial/IR control pin configurations |
| | 1 = TX, 2 = RX, 3 = GND, 4 = modulated IR, 5 = +12 VDC |
| IR controller module | AVT Remote (optional)
30' maximum, 40 degrees off axis |
| Program control | Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™) |
|
| General |
|---|
| External Power supply | 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 1 A (max.), regulated |
| Power input requirements | 12 VDC, 0.5 A |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, unvented |
| Rack mount | Yes, with optional 1U, 9.5" deep rack shelf, part #60-190-01 (RSU 129) or 60-604-01 (RSB 129) |
| Enclosure type | Metal |
| Enclosure dimensions | 1.7" H x 4.3" W x 6.7" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 17.0 cm D)
(Depth excludes connectors.) |
| Product weight | 0.8 lbs (0.4 kg) |
| Shipping weight | 3 lbs (2 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor |
| NOTE | All nominal levels are at ±10% |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.53-080607-D9) |