Fiber Matrix 6400 Fiber Optic I/O Board Fuori produzione

8x8 Fiber Optic I/O Board for the Fiber Matrix 6400

Caratteristiche principali

Multimode and singlemode I/O boards for the Fiber Matrix 6400
Compatible with all FOX Series transmitters and receivers
Modular, field-upgradeable and hot-swappable design
Industry standard LC connectors provide reliable physical connectivity and precise fiber core alignment

The Extron Fiber Matrix 6400 Fiber Optic I/O Board

Modello	Descrizione prodotto	Codice articolo
Fiber Matrix 6400 I/O Board - MM	Multimode	70-649-01	Fuori produzione
Fiber Matrix 6400 I/O Board - SM	Singlemode	70-649-02	Fuori produzione

Questo prodotto è stato ritirato.

The Extron Fiber Matrix 6400 I/O Boards are designed for use with the Fiber Matrix 6400 Modular Fiber Optic Matrix Switcher and enable complete, end-to-end digital AV signal transmission and routing over fiber optic cable. Supporting rates up to 4.25 Gbps, they accept and route HDMI, DVI, 3G-SDI, high resolution computer-video, and standard definition video. The I/O boards are hot-swappable and may be added at any time in the field for easy and quick upgradeability or expansion.

Each Fiber Matrix 6400 I/O Board has eight ports populated with LC-type fiber optic connectors. Two versions of the board are available. The Fiber Matrix 6400 I/O Board - MM supports multimode fiber at 850 nm, which is typically used within buildings or facilities with moderate-range transmission distances. The Fiber Matrix 6400 I/O Board - SM supports singlemode as well as multimode fiber at 1310 nm. Singlemode fiber offers long-range transmission capability over extreme distances of several kilometers or miles. It is used in very large facilities such as hospitals and stadiums, and for connecting over very long distances between facilities such as university campuses.

Caratteristiche

Multimode and singlemode I/O boards for the Fiber Matrix 6400 — The Fiber Matrix 6400 is configurable with a mix of multimode and singlemode versions of the Fiber Matrix 6400 I/O Boards, so that both short and long haul transmission can be supported.

Compatible with all FOX Series transmitters and receivers — The Fiber Matrix 6400 offers up to 4.25 Gbps digital switching capability for routing audio, control, and video signals in multiple formats with uncompressed, pixel-for-pixel throughput. This level of performance assures compatibility up to the highest source resolutions, including HDMI, DVI, 3G-SDI, and high resolution RGB computer video.

Modular, field-upgradeable and hot-swappable design — Additional input and output boards may be added at any time for easy and quick upgradeability or expansion. Hot-swappable components allow the user to replace an I/O board at any time without the need to power down the switcher. This is especially useful for mission-critical applications that require continuous operation of the Fiber Matrix 6400.

Industry standard LC connectors provide reliable physical connectivity and precise fiber core alignment

Nota: The Fiber Matrix 6400 I/O Boards are designed for use with the Fiber Matrix 6400 and are not compatible with the FOX Matrix Switchers.

PRODOTTI SIMILI
	Extron Matrix 1K	Programma per matrici di grandi dimensioni fino a 1000x1000
	FOX I/O 1616 HD-SDI	Scheda I/O 3G-SDI 16x16 per FOX Matrix 14400 e FOX Matrix 320x
	FOX Matrix 3200	Matrice modulare in fibra ottica da 8x8 a 32x32
	FOX Matrix 320x	Matrice modulare in fibra ottica da 16x16 a 320x320
	FOX Matrix 7200	Matrice modulare in fibra ottica da 8x8 a 72x72
	FOX3 Matrix 160x	Matrice modulare in fibra ottica da 8x8 a 160x160
	FOX3 Matrix 24x	Matrice modulare in fibra ottica da 8x8 a 24x24
	FOX3 Matrix 320x	Matrice modulare in fibra ottica da 8x8 a 320x320
	FOX3 Matrix 40x	Matrice modulare in fibra ottica da 8x8 a 40x40
	FOX3 Matrix 560x	Matrice modulare in fibra ottica da 8x8 a 560x560
	FOX3 Matrix 80x	Matrice modulare in fibra ottica da 8x8 a 80x80
	FOX3 Matrix 840x	Matrice modulare in fibra ottica da 8x8 a 840x840

PRODOTTI SIMILI

Extron Matrix 1K

Programma per matrici di grandi dimensioni fino a 1000x1000

FOX I/O 1616 HD-SDI

Scheda I/O 3G-SDI 16x16 per FOX Matrix 14400 e FOX Matrix 320x

FOX Matrix 3200

Matrice modulare in fibra ottica da 8x8 a 32x32

FOX Matrix 320x

Matrice modulare in fibra ottica da 16x16 a 320x320

FOX Matrix 7200

Matrice modulare in fibra ottica da 8x8 a 72x72

FOX3 Matrix 160x

Matrice modulare in fibra ottica da 8x8 a 160x160

FOX3 Matrix 24x

Matrice modulare in fibra ottica da 8x8 a 24x24

FOX3 Matrix 320x

Matrice modulare in fibra ottica da 8x8 a 320x320

FOX3 Matrix 40x

Matrice modulare in fibra ottica da 8x8 a 40x40

FOX3 Matrix 560x

Matrice modulare in fibra ottica da 8x8 a 560x560

FOX3 Matrix 80x

Matrice modulare in fibra ottica da 8x8 a 80x80

FOX3 Matrix 840x

Matrice modulare in fibra ottica da 8x8 a 840x840

Specifiche

Fiber Matrix 6400

NOTE	The Fiber Matrix 6400 fiber optic I/O boards are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21, CFR 1040.10, and FDA 21 CFR 1040.11.

Optical specifications

Number/type

8 singlemode or 8 multimode fiber optic inputs and outputs per I/O board

Connectors

8 LC connectors per I/O board

Operating distance

Singlemode

30 km (18.75 miles) with singlemode (SM) cables with an Extron singlemode Tx/Rx unit

Multimode

300 m (985') with 62.5 µm multimode (MM) cables with an Extron multimode Tx/Rx unit
1 km (3280') with 50 µm multimode (MM) cables with an Extron multimode Tx/Rx unit
2 km (6561') with 50 µm 2000 MHz bandwidth laser multimode cable with an Extron multimode Tx/Rx unit

NOTE	Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

Nominal peak wavelength

850 nm for multimode (MM), 1310 nm for singlemode (SM)

Transmission power

Singlemode

-5 dBm, typical

Multimode

-5 dBm, typical

Maximum receiver sensitivity

Singlemode

-18 dBm, typical

Multimode

-12 dBm, typical

Optical loss budget

Singlemode

13 dB, maximum

Multimode

7 dB, maximum

Maximum channel data rate

4.25 Gbps

Video

Routing

8 x 8 up to 64 x 64 unidirectional (Tx) matrix or
4 x 4 up to 32 x 32 bidirectional (Tx/Rx) matrix

Gain

Unity

Video/audio input

Number/signal type

8 to 64 fiber optic signals

Connectors

8 LC connectors per I/O board

Video/audio output

Number/signal type

8 to 64 fiber optic signals

Connectors

8 LC connectors per I/O board

Control/remote — switcher

Serial control port

1 bidirectional RS-232 or RS-422, female 9-pin D connector (rear panel)
1 bidirectional RS-232, 2.5 mm mini stereo jack (front panel )

Baud rate and protocol

9600 to 115200 baud, 9600 baud (default), 8 data bits, 1 stop bit, no parity

Serial control pin configurations

9-pin female D connector

RS-232: 2 = Tx, 3 = Rx, 5 = GND
RS-422: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+

Mini stereo jack

RS-232: tip = Tx, ring = Rx, sleeve = GND

Ethernet control port

1 female RJ-45 connector

Ethernet data rate

10/100Base-T, half/full duplex with autodetect

Ethernet protocol

ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet

Default settings

Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off

Web server

Up to 200 simultaneous sessions
3 MB nonvolatile user memory

Program control

Extron control/configuration program for Windows^®
Extron Simple Instruction Set (SIS^™)
Microsoft^® Internet Explorer ver. 6 or higher, Telnet

General

Power*

2 (positive-negative), 100 VAC to 240 VAC, 50-60 Hz; internal
Enclosure without boards: 35 watts at 115 VAC, 60 Hz
Enclosure fully loaded with 8 boards: 115 watts at 115 VAC, 60 Hz
Each module board: 10 watts at 115 VAC, 60 Hz
^*A redundant power supply is standard.

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Fan, right to left (as viewed from front panel)

Mounting

Rack mount

Yes

Enclosure type

Metal

Enclosure dimensions

12.25" H x 17.0" W x 12.25" D (7U high, full rack wide)
(31.1 cm H x 43.1 cm W x 31.1 cm D)
(Depth excludes connectors and front handles. Width excludes rack ears.)

Product weight (fully loaded)

35.8 lbs (16.2 kg)

Shipping weight

43 lbs (20 kg)

DIM weight

USA/Canada

146 lbs (63 kg)

International

171 lbs (78 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, UL

EMI/EMC

CE, C-tick, FCC Class A, ICES, VCCI

MTBF

30,000 hours

Warranty

3 years parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(7.6-092209-D8)

Diagramma

Fiber Matrix 6400 Fiber Optic I/O Board System Diagram