| FOX II T/R DP 4K |
| | |
|
 specification |
|---|
 |
| Frame rate1 | 24, 25, 30, 50, 60, or 120 fps |
| Chroma sampling1 | 4:4:4 |
| Color bit depth1 | 8 or 10 bits per color |
| Signal Type | HDMI 1.4, DisplayPort 1.1a, HDCP 1.3 |
| Max. video data rate | 9.85 Gbps |
| NOTE | 1Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate. |
|
| NOTE | This product requires two parallel connections to achieve 4K at 50 or 60 fps at 8 bits per color. |
|
| NOTE | This product requires four parallel connections to achieve 4K at 50 or 60 fps at 10 bits per color. |
|
| NOTE | This product requires four parallel connections to achieve 4K at 120 fps at 8 bits per color. |
|
| NOTE | The analog audio signal(s) is (are) digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver. |
|
| NOTE | These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825.
|
|
|
| Optical fiber interconnection between transmitter and receiver |
|---|
| Number/type | 2 fiber optic |
| Connectors | 2 LC connectors |
| Operating distance | |
| Singlemode | 30 km (18.75 miles) with singlemode (SM) cables |
| Multimode | 300 m (984') with 62.5 µm OM1 multimode (MM) cables
1 km (3280') with 50 µm OM2 multimode (MM) cables
2 km (6561') with 50 µm OM3/OM4 2000/4700 MHz bandwidth laser optimized multimode cables |
| NOTE | Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. |
|
| Nominal peak wavelength | 850 nm for multimode, 1310 nm for singlemode |
| Data rate | 4.25 Gbps |
| Transmission power | |
| Singlemode | -5 dBm, typical |
| Multimode | -5 dBm, typical |
| Maximum receiver sensitivity | |
| Singlemode | -18 dBm, typical |
| Multimode | -12 dBm, typical |
| Optical loss budget | |
| Singlemode | 13 dB, maximum |
| Multimode | 7 dB, maximum |
|
| Video |
|---|
| Maximum data rate | Up to 9.85 Gbps |
| Maximum pixel clock | 300 MHz |
| Resolution range | 640x480 up to 4096x2160 @ 30 Hz or UHD (3840x2160), including 2K, and 1920x1200, including 480p, 576p, 720p, 1080i @ 25/30 Hz, 1080p @ 50/60/120 Hz |
| Color bit depth | 12 bits for resolutions up to 1080p, 10 bits for resolutions above 1080p |
| EDID | Supports emulation of custom or factory preset Extended Display Identification Data (EDID) tables. |
| Standards | DisplayPort 1.1a, HDMI 1.4, HDCP 1.3 |
|
| Video input and loop through — transmitters |
|---|
| Number/signal type | 1 DisplayPort input
1 DisplayPort loop-through |
| Connectors | 1 female DisplayPort input
1 female DisplayPort loop-through |
|
| Video output — receiver |
|---|
| Number/signal type | 1 DisplayPort |
| Connectors | 1 female DisplayPort |
| Video delay | <1 frame |
|
| Audio |
|---|
| Gain | |
| Range | Adjustable, -18 dB to +13 dB |
| Default | |
| Captive screw connector | Balanced output: 0 dB; unbalanced output: -6 dB |
| Mini stereo jack | Unbalanced output: 0 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB |
| THD + Noise | 0.10% @ 1 kHz at nominal level |
| S/N | >90 dB at maximum output (unweighted) |
| CMRR | 65 dB @ 20 Hz to 20 kHz |
| Audio bits per sample | 18 bits per channel, 2 channels (L, R) |
| Sampling rate | 32 kHz, 44.1 kHz, 48 kHz |
|
| Audio input — transmitter |
|---|
| Number/signal type | 1 digital audio, de-embedded from DisplayPort or
2 inputs:
1 balanced stereo
1 unbalanced stereo or 2 unbalanced mono |
| Connectors | 1 female DisplayPort (shared with video input)
(1) 3.5 mm stereo jack
(1) 3.5 mm captive screw connector, 5 pole |
| Impedance | ≥10k ohms unbalanced, ≥20k ohm balanced |
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) |
| Maximum level | +21.0 dBu, balanced at 1% THD+N (5-pole); +15.0 dBV, unbalanced (3.5 mm stereo) |
| Source formats | 2 CH LPCM |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output — receiver |
|---|
| Number/signal type | 1 digital audio, embedded with DisplayPort output
2 buffered outputs:
1 balanced stereo; 1 unbalanced stereo or 2 unbalanced mono |
| Connectors | 1 female DisplayPort (shared with video output)
(1) 3.5 mm stereo jack
(1) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced (analog only) |
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) |
| Maximum level (Hi-Z) | +12 dBu balanced, at 1% THD+N (5-pole); +9 dBu, unbalanced (3.5 mm stereo) |
| Audio delay | <1 frame |
| Source formats | 2 CH LPCM |
|
| Audio return input — receivers |
|---|
| Number/signal type | 1 stereo/mono, balanced |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole
|
| Impedance | ≥20k ohm balanced |
| Nominal level | +4 dBu (1.23 Vrms) |
| Maximum level (Hi-Z) | +12.0 dBu, balanced at 1% THD+N |
|
| Audio return output — transmitter |
|---|
| Number/signal type | 1 stereo/mono, balanced |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole
|
| Impedance | 100 ohms balanced (analog only) |
| Nominal level | +4 dBu (1.23 Vrms) |
| Maximum level (Hi-Z) | +12.0 dBu, balanced at 1% THD+N |
|
| Control/remote |
|---|
| Serial control ports on each unit (transmitter and receiver) |
| Control | 1 female mini USB port B (front panel)
1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used), rear panel |
| Pass-through | 1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used), rear panel |
| Baud rate and protocol | |
| Control | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Pass-through | 9600 to 115,200 baud |
| Serial control pin configuration | Captive screw: 1 = Tx, 2 = Rx, 3 = GND |
| Program control | Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™) |
| IR control port | (1) 3.5 mm captive screw connector, 5 pole (connector is shared with RS-232 pass thru) TTL level (0 to 5V) modulated infrared control from 30kHz to 40 kHz |
| IR control pin configuration | 3 = GND, 4 = IR Tx, 5 = IR Rx |
|
| General |
|---|
| Power supply | Internal
Input: 100-240 VAC, 50-60 Hz |
| Power consumption | |
| Transmitter | 18.4 watts |
| Receiver | 16.5 watts |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Fan, front to back |
| Thermal dissipation | |
| Transmitter | 61.4 BTU/hr |
| Receiver | 55.0 BTU/hr |
| Mounting | |
| Rack mount | Yes, with optional rack shelf |
| Furniture mount | Yes, with optional under desk mounting kit |
| Enclosure type | Metal |
| Enclosure dimensions | |
| Transmitter | 1.65" H x 8.7" W x 8.5" D (half rack wide)
(4.2 cm H x 22.1 cm W x 21.6 cm D)
(Depth excludes connectors.) |
| Receiver | 1.65" H x 8.7" W x 8.5" D (half rack wide)
(4.2 cm H x 22.1 cm W x 21.6 cm D)
(Depth excludes connectors.) |
| Product weight | |
| Transmitter | 2.1 lbs (1.0 kg) |
| Receiver | 2.1 lbs (1.0 kg) |
| Regulatory compliance | CE, c-UL, UL, C-tick, FCC Class A, ICES, VCCI
Complies with the appropriate requirements of RoHS, WEEE. |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (4971-D7) |