IPL T SF24 Fuori produzione

Interfaccia di controllo Ethernet con 2 porte seriali e 4 porte di I/O flessibili
Caratteristiche principali
  • Due porte seriali e quattro porte di I/O flessibili
  • Supporto per RS-232, RS-422 e RS-485
  • Possibilità di controllare e monitorare dispositivi AV in remoto tramite Web da un qualsiasi computer collegato a Internet o a una rete LAN o WAN
  • Server Web integrato
The Extron IPL T SF24
Modello Descrizione prodotto Codice articolo
 IPL T SF24 Two serial, four Flex I/O 60-544-02 Fuori produzione

Questo prodotto è stato ritirato.

Caratteristiche

  • Due porte seriali e quattro porte di I/O flessibili
  • Supporto per RS-232, RS-422 e RS-485
  • Possibilità di controllare e monitorare dispositivi AV in remoto tramite Web da un qualsiasi computer collegato a Internet o a una rete LAN o WAN
  • Server Web integrato
ACCESSORI OPZIONALI
  RSU 129 Rack Shelf Kit Universale per Prodotti con Profondità di 9,5"
  RSF 123 Kit di supporto rack per prodotti profondi 8,9 cm
  MBU 123 Kit di montaggio a basso profilo per prodotti da un ottavo, un quarto e metà rack

Specifiche

IPL T SF24, IPL T SFI244
Ethernet control interface
   Connectors 1 RJ-45 female connector
   Data rate 10/100Base-T, half/full duplex with autodetect
   Protocols ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
   Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
   Web server Up to 200 simultaneous sessions
      IPL T SF24 1.25 MB nonvolatile user memory
      IPL T SFI244 7.25 MB nonvolatile user memory
   Program control Extron's Simple Instruction Set (SIS)
   Global Viewer requirements Microsoft® Internet Explorer ver. 6 or higher
Serial control interface
   Quantity/type 
      IPL T SF24 2 RS-232/RS-422/RS-485 configurable serial
      IPL T SFI244 2 RS-232 only
   Connectors 
      IPL T SF24 (2) 9-pin male D and (1) 3.5 mm captive screw connector, 5 pole
      IPL T SFI244 (1) 3.5 mm captive screw connector, 5 pole
   Baud rate and protocol 300 to 115200 baud
Default settings (adjustable): 9600 baud, 8 data bits, 1 stop bit, no parity
   Pin configurations 
      Serial, 9-pin D — IPL T SF24
         RS-232 (default) 2 = RX, 3 = TX, 5 = GND, 7 = RTS, 8 = CTS
         RS-422 2 = RX-, 3 = TX-, 5 = GND, 7 = TX+, 8 = RX+
         RS-485 2 and 3 (tied together) = data-, 5 = GND, 7 and 8 (tied together) = data+
      Serial, 5-pole captive screw — both models 
          COM1: pin 1 = TX, 2 = RX, 3 = GND
COM2: pin 4 = TX, 5 = RX, 3 = GND
Flex I/O control interface
   Quantity/type 4 analog input or digital input/output(configurable)
   Connectors (1) 3.5 mm captive screw connector, 5 pole
   Digital inputs 
      Input voltage range 0 to 24 VDC, clamped at +30 VDC
      Input impedance 28k ohms
      Programmable pullup 2k ohms to +5 VDC
      Threshold low to high Programmable range: 100 mV to 24 VDC, default = 2 VDC
      Threshold high to low Programmable range: 100 mV to 24 VDC, default = 1 VDC
   Digital outputs 250 mA sink from 24 VDC max.
   Analog inputs  12 bit A/D, 0 to 24 VDC
   Pin configurations 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = GND
IR control interface — IPL T SFI244 only
   Quantity/type 4 IR
   Connectors (1) 3.5 mm captive screw connector, 8 pole
   IR output carrier frequency 30 kHz to 1 MHz
   Pin configurations Pins 1, 3, 5, 7 = S 1, S2, S3, S4
Pins 2, 4, 6, 8 = GND
   IR learning carrier frequency 30 kHz to 1 MHz
   IR learning capture distance 2" (5.1 cm) to 12" (30.5 cm) from the front panel
General
   Power Supplied by an included external power supply
   External Power supply 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated
   Power input requirements  12 VDC, 0.5 A
   Ambient temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting
      Rack mount Yes, with optional 1U, 9.5" deep rack shelf kit, part #60-190-01 (RSU 129); 6" rack shelf kit, part #60-190-10 (RSU 126) or 60-604-10 (RSB 126) or 3.5" deep rack shelf kit, part #60-190-20 (RSF 123)
      Furniture mount Yes, with optional under-desk mounting kit, part #70-212-01 (MBU 123)
      Pole mount Yes, with optional mini pole mount kit, part #70-217-01 (PMK 100)
   Enclosure type  Metal
   Enclosure dimensions 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
   Product weight  0.7 lbs (0.3 kg)
   Shipping weight  2 lbs (1 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety CE, CUL, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60950 for safety
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Product warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(7.6-020409-D11)

Diagramma

IPL T SF24 System Diagram

Pannello illustrativo

IPL T SF24 Panel Drawing