| MMX 42 Series, MMX 62 Series |
|
| Video |
|---|
| Routing | |
| MMX 42 Series | 4 x 2 matrix |
| MMX 62 Series | 6 x 2 matrix |
| Gain | Unity |
| Bandwidth | 150 MHz (-3 dB), fully loaded |
| 0 - 10 MHz | No more than +0.1 dB to -0.1 dB |
| 0 - 130 MHz | No more than +0.5 dB to -0.5 dB |
| Phase between I/Os | <1.28° at 3.58 MHz |
| Differential phase error | 0.1° at 3.58 MHz and 4.43 MHz |
| Differential gain error | 0.1% at 3.58 MHz and 4.43 MHz |
| Max. propagation of delay | 5 ns typical (±1 ns) |
| Crosstalk | -50 dB @ 5 MHz |
| Switching speed | 200 ns (max.) |
|
| Video input |
|---|
| Number/signal type | |
| MMX 42 and MMX 62 composite video models | 4 or 6 composite video |
| MMX 42 SVA | 4 S-video |
| Connectors | |
| MMX 42 and MMX 62 composite video models | 4 or 6 female BNC |
| MMX 42 SVA | 4 female 4-pin mini DIN |
| Nominal level | 1 Vp-p for Y of S-video, and for composite video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0.5 V to 2.0 Vp-p with no offset |
| Impedance | 75 ohms |
| Return loss | <-30 dB @ 5 MHz |
| DC offset (max. allowable) | 1.5 V |
|
| Video output |
|---|
| Number/signal type | |
| MMX 42 and MMX 62 composite video models | 2 composite video |
| MMX 42 SVA | 2 S-video |
| Connectors | |
| MMX 42 and MMX 62 composite video models | 2 female BNC |
| MMX 42 SVA | 2 female 4-pin mini DIN |
| Nominal level | 1 Vp-p for Y of S-video, and for composite video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | 0 V to 2.0 Vp-p |
| Impedance | 75 ohms |
| Return loss | -30 dB @ 5 MHz |
| DC offset | ±5 mV maximum with input at 0 offset |
| Switching type | Vertical interval |
|
| Sync |
|---|
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
|
| Audio |
|---|
| Routing | |
| MMX 42 Series | 4 x 2 stereo matrix |
| MMX 62 Series | 6 x 2 stereo matrix |
| Gain | |
| Captive screw models | Unbalanced output: -6 dB; balanced output: 0 dB |
| RCA connector models | Unbalanced output: 0 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise | 0.03% @ 1 kHz at rated nominal level |
| S/N | >90 dB, output 21 dBu, balanced, at maximum output (unweighted) |
| Crosstalk | <-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation | >90 dB @ 1 kHz |
| CMRR | >75 dB @ 20 Hz to 20 kHz |
|
| Audio input |
|---|
| Number/signal type | |
| Captive screw models | 4 or 6 stereo, balanced/unbalanced |
| RCA connector models | 4 or 6 stereo, unbalanced |
| Connectors | |
| Captive screw models | (4 or 6) 3.5 mm captive screw connectors, 5 pole |
| RCA connector models | 4 or 6 pairs of female RCA connectors |
| Impedance | >10k ohms unbalanced/balanced, DC coupled |
| Nominal level | -10 dBV (316 mV) |
| Maximum level | +19.5 dBu, (balanced or unbalanced) at 1%THD+N |
| Input gain adjustment | –18 dB to +24 dB, adjustable per input via RS-232 only |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output |
|---|
| Number/signal type | |
| Captive screw models | 2 stereo, balanced/unbalanced |
| RCA connector models | 2 stereo, unbalanced |
| Connectors | |
| Captive screw models | (2) 3.5 mm captive screw connectors, 5 pole |
| RCA connector models | 2 pairs of female RCA connectors |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1 dB channel to channel |
| Maximum level (Hi-Z) | >+21 dBu, balanced or unbalanced at 1%THD+N |
| Maximum level (600 ohm) | >+15 dBm, balanced or unbalanced at 1%THD+N |
|
| Control/remote — switcher |
|---|
| Serial control port | RS-232, female 3.5 mm captive screw connector, 3 pole |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations | 1 = TX, 2 = RX, 3 = GND |
| Program control | Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™) |
|
| General |
|---|
| External Power supply | 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated |
| Power input requirements | 12 VDC, 0.5 A |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Mounting | |
| Rack mount | Yes, with optional 1U rack shelf |
| Enclosure type | Metal |
| Enclosure dimensions | 1.75" H x 8.75" W x 3.0" D (1U high, half rack wide)
4.4 cm H x 22.2 cm W x 7.6 cm D
(Depth excludes connectors.) |
| Product weight | 4.0 lbs (1.8 kg) |
| Shipping weight | 5 lbs (3 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Listings | CE, c-UL, UL |
| Compliances | CE, C-tick, FCC Class A , ICES, VCCI |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.6-090909-D4) |