| MTP SW6 |
|
| Video |
|---|
| Gain | Unity |
|
| Video input — see MTP Series transmitter specifications |
|---|
| Number/signal type | 6 sets of proprietary analog signals |
| Connectors | 6 female RJ-45 |
|
| Video output — See MTP Series receiver specifications |
|---|
| Number/signal type 1 set of proprietary analog signals |
| Connectors | 1 female RJ-45 |
| Maximum resolution | 1920x1200 |
| NOTE | Refer to the user's manual for the maximum distances recommended for specific resolutions. |
|
|
| Audio |
|---|
| Number/signal type | 1 set of proprietary analog signals |
| Connectors | 1 female RJ-45 |
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response | 20 Hz to 20 kHz, ±1 dB |
| THD + Noise | 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
| S/N | >70 dB at maximum output (unweighted) |
| CMRR | >43 dB @ 20 Hz to 20 kHz |
|
| Audio input — see MTP Series transmitter specifications |
|---|
| Number/signal type | 6 sets of proprietary analog signals |
| Connectors | 6 female RJ-45 |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output — local |
|---|
| Number/signal type | 1 dual mono, balanced/unbalanced |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±1 dB channel to channel |
| Maximum level (Hi-Z) | >+18 dBu, balanced or unbalanced at 1% THD+N |
| Maximum level (600 ohm) | >+15 dBm, balanced or unbalanced at 1% THD+N |
|
| Audio output — see MTP Series receiver specifications |
|---|
| Number/signal type | 1 set of proprietary analog signals |
| Connectors | 1 female RJ-45 |
|
| Control/remote — switcher host control |
|---|
| Serial control port | 1 RS-232, 9-pin female D connector |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configuration | 2 = TX, 3 = RX, 5 = GND |
| Program control | Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™) |
|
| Control/remote — external device (pass-through) |
|---|
| Serial control port | RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles) |
| Baud rate and protocol | Up to 38400 baud; 5-8 data bits; 1 or 2 stop bits; odd, even, or no parity; XON, XOFF, or no flow control |
| NOTE | Protocol is mirrored between the switcher and the receiver. |
|
| Serial control pin configuration | 1 = TX, 2 = RX, 3 = GND |
|
| General |
|---|
| Recommended cable type | CAT5/5E/6 (shielded or unshielded) |
| External Power supply | 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 2 A, regulated |
| Power input requirements | 12 VDC, 0.8 A |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, vents on right and left sides |
| Mounting | |
| Rack mount | Yes, with optional 1U, 9.5" deep rack shelf (RSU 129, #60-190-01 or RSB 129, 60-604-01) or 1U, 6" deep rack shelf (RSU 126, #60-190-10 or RSB 126, 60-604-10) |
| Furniture mount | Yes, with optional Under-Desk Mounting Kit (MBU 125, part #70-077-01) |
| Enclosure type | Metal |
| Enclosure dimensions | 1.7" H x 8.7" W x 6.0" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 15.2 cm D)
(Depth excludes connector and knob.) |
| Product weight | 1.2 lbs (0.5 kg) |
| Shipping weight | 3 lbs (2 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, CUL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.6-100908-D7) |