| SW 4/6/8/12AV Series Switchers |
|
| Video |
|---|
| Gain | Unity |
| Bandwidth | |
| Composite video 4, 6, and 8 input models | 300 MHz (-3 dB) |
| S-video models and composite video 12 input models | 250 MHz (-3 dB) |
| Crosstalk | <-60 dB @ 5 MHz |
| Switching speed | <20 ms (max.) |
|
| Video input |
|---|
| Number/signal type | |
| SW 8/12V, SW 4/6/8AV/AV RCA, SW 6/8/12A/A RCA | 4, 6, 8, or 12 (depending on the model) composite video |
| SW 6/8/12SV, SW 4/6SVA/SVA RC | 4, 6, 8, or 12 (depending on the model) S-video |
| Connectors | |
| SW 8/12V, SW 4/6/8AV/AV RCA, SW 6/8/12A/A RCA | 4, 6, 8, or 12 (depending on the model) female BNC |
| SW 6/8/12SV, SW 4/6SVA/SVA RC | 4, 6, 8, or 12 (depending on the model) female 4-pin mini DIN |
| Nominal level | 1 Vp-p for Y of S-video, and for composite video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | 0.4 V to 2.0 Vp-p with no offset |
| Impedance | 75 ohms |
| Return loss | <-29 dB @ 0 to 10 MHz |
| DC offset (max. allowable) | 5.0 V |
|
| Video output |
|---|
| Number/signal type | |
| Composite video models | 2 buffered composite video |
| S-video models | 1 buffered S-video, 1 buffered composite video |
| Connectors | |
| Composite video models | 2 female BNC |
| S-video models | 1 female BNC, 1 female 4-pin mini DIN |
| Nominal level | 1 Vp-p for Y of S-video, and for composite video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | 0.4 V to 2.0 Vp-p (follows input) |
| Impedance | 75 ohms |
| Return loss | -30 dB @ 5 MHz |
| DC offset | ±5 mV with input at 0 offset |
| Switching type | Vertical interval switching |
|
| Sync |
|---|
| Genlock connectors | 2 female BNC (1 input, 1 loop-through) |
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
|
| Audio |
|---|
| Gain | Adjustable. When gain is set to unity (0 dB), balanced output from captive screw connectors or unbalanced output from RCA connectors has a 0 dB gain; unbalanced output from captive screw connectors is attenuated by 6 dB. |
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB |
| THD + Noise | <0.04% @ 1 kHz at nominal level |
| S/N | >90 dB at maximum output (unweighted) |
|
| Audio input |
|---|
| Number/signal type | |
| SW 4/6/8AV, SW 4/6SVA, SW 6/8/12A | 4, 6, 8, or 12 (depending on the model) stereo, balanced/unbalanced |
| SW 4/6AV RCA, SW 4/6SVA RCA, SW 6A RCA | 4, 6, 8, or 12 (depending on the model) stereo, unbalanced |
| Connectors | |
| SW 4/6/8AV, SW 4/6SVA, SW 6/8/12A | 4, 6, 8, or 12 (depending on the model) 3.5 mm captive screw connectors, 5 pole |
| SW 4/6AV RCA, SW 4/6SVA RCA, SW 6A RCA | 8, 12, 16, or 24 (depending on the model) female RCA |
| Impedance | |
| RCA models | 12k ohms unbalanced, DC coupled |
| All other models | 25k ohms unbalanced, 50k ohms balanced, DC coupled |
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms), configurable |
| Maximum level | >+15 dBu, (balanced or unbalanced) at 1% THD+N |
| Input gain adjustment | –18 dB to +24 dB, adjustable per input |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu. |
|
|
| Audio output |
|---|
| Number/signal type | |
| SW 4/6/8AV, SW 4/6SVA, SW 6/8/12A | 2 stereo, balanced/unbalanced |
| SW 4/6AV RCA, SW 4/6SVA RCA, SW 6A RCA | 1 stereo, unbalanced |
| Connectors | |
| SW 4/6/8AV, SW 4/6SVA, SW 6/8/12A | (2) 3.5 mm captive screw connectors, 5 pole |
| SW 4/6AV RCA, SW 4/6SVA RCA, SW 6A RCA | 2 female RCA
(1) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1 dB channel to channel |
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms), configurable |
| Maximum level (Hi-Z) | >26 dBu, balanced; >+20 dBu, unbalanced at 1% THD+N |
| Maximum level (600 ohm) | >21 dBm, balanced; >+15 dBm, unbalanced at 1% THD+N |
|
| Control/remote — switcher |
|---|
| Serial control port | RS-232, female 9-pin D connector (also used for contact closure for 4- and 6-input models) |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configuration | 2 = Tx, 3 = Rx, 5 = GND |
| Contact closure (SW 4 and 6 models only) | 1 female 9-pin D connector (also used for RS-232) |
| Contact closure pin configuration (SW 4 and 6 models only) | 1 = input 1, 4 = input 2, 5 = GND, 6 = input 3, 7 = input 4, 8 = input 5, 9 = input 6 |
| IR controller module | Extron IR 102 kit (optional) |
| Program control | Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™) |
|
| General |
|---|
| Power supply | Internal
Input: 100-240 VAC, 50-60 Hz |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Mounting | |
| Rack mount | Yes, with included rack mounting kit |
| Furniture mount | Yes, with optional under-desk mounting kit |
| Enclosure type | Metal |
| Enclosure dimensions | 1.75" H x 17.4" W x 8.5" D (1U high, full rack wide)
4.4 cm H x 44.2 cm W x 21.6 cm D
(Depth excludes connectors.) |
| Product weight | 7.0 lbs (3.2 kg) |
| Shipping weight | 10 lbs (5 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (8.0-090712-D9) |