| TP Series Transmitters |
|
| Video — video models |
|---|
| Number/signal type | 1, 2, or 4 sets of proprietary analog signals |
| Connectors | 1, 2, or 4 shielded RJ-45 female |
| TP T 15HD 45 | (1) 8-pin spring force captive wire connector |
| All other models | 1, 2, or 4 shielded RJ-45 female |
|
| Video input — video models |
|---|
| Number/signal type | |
| TP T 15HD A, TP T 15HD 45 | 1 analog RGBHV, RGBS, RGsB, component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL composite video from a single source |
| TP T 15HD AV | 1 analog RGBHV, RGBS, RGsB component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL/SECAM composite video from a single source and
1 NTSC/PAL/SECAM composite video |
| TP T BNC DA4 | 1 analog RGBHV, RGBS, RGsB, component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL/SECAM composite video from a single source |
| NOTE | These products accept component video with bi-level sync only. |
|
| Connectors | |
| TP T 15HD A, TP T 15HD 45 | (1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available.) |
| TP T 15HD AV | (1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available.)
1 RCA female |
| TP T BNC DA4 | 5 BNC female |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | 0.3 V to 1.45 Vp-p with no offset at unity gain |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 130 kHz |
| Vertical frequency | 30 Hz to 150 Hz |
| Return loss | <-30 dB @ 5 MHz |
| DC offset (max. allowable) | 100 mV |
|
| Video output — refer to the TP Receivers Family User's Manual, part #68-547-02. |
|---|
|
| Audio — audio models |
|---|
| Number/signal type | 1 or 2 sets of analog proprietary signals |
| Connectors | |
| TP T A 45 | (1) 2-pin direct insertion captive screw connector |
| All other models | 1 or 2 female RJ-45 |
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
| S/N | >63 dB at maximum output (unweighted) |
| Crosstalk | <-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation | >66.6 dB @ 1 kHz |
| CMRR | >33 dB @ 20 Hz to 20 kHz |
|
| Audio input — audio models |
|---|
| Number/signal type | |
| TP T 15HD A, TP T A 45 | 1 stereo, unbalanced |
| TP T 15HD AV | 2 stereo, unbalanced |
| Connectors | |
| TP T 15HD A, TP T A 45 | (1) 3.5 mm mini jack |
| TP T 15HD AV | (1) 3.5 mm mini jack, 2 female RCA |
| Impedance | 5k ohms, unbalanced, DC coupled |
| Nominal level | -10 dBV (316 mV) |
| Maximum level | +5.5 dBu, (unbalanced) at 1%THD+N |
| CMRR | >75 dB @ 20 Hz to 20 kHz |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output — refer to the TP Receivers Family User's Manual, part #68-547-02. |
|---|
|
| General |
|---|
| Recommended cable type | Enhanced Skew-Free™ AV UTP Cable or CAT 5/5e/6 (shielded or unshielded) |
| Power supply | |
| TP T 15HD A, TP T 15HD AV | External
Output: 15 VDC, 0.8 A
Or provided by the TP R receiver for up to 300' (91.4 m) |
| TP T BNC DA4 | External
Output: 15 VDC, 0.8 A |
| TP T 15HD 45 | External
Output: 12 VDC, 1.0 A |
| TP T A 45 | Shared with the TP T 15HD 45 transmitter |
| NOTE | The TP R 15HD A receiver does not provide power to any twisted pair transmitter. |
|
| Ambient temperature/humidity | Storage -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Mounting |
| Rack mount |
| TP T 15HD A, TP T 15HD AV, TP T BNC, TP T BNC DA4 | Yes, with the optional TP rack shelf mounting kit and an optional standard rack shelf kit |
| Furniture mount | |
| TP T 15 HD A, TP T 15 HD AV, TP T BNC DA4 | Yes, with an optional under-desk or through-desk mounting kit |
| TP T 15HD 45, TP T A 45 | No, but mountable in a 45 mm x 45 mm opening in common European wall boxes, floor boxes, or cable channel systems |
| Enclosure type | Metal |
| Enclosure dimensions | |
| TP T 15 HD A, TP T 15 HD AV, TP T BNC DA4 | 1.3" H x 6.8" W x 4.5" D (<1U high, <half rack width)
(3.3 cm H x 17.3 cm W x 11.4 cm D)
(Depth excludes connectors.) |
| TP T 15HD 45, TP T A 45 |
| Plate | 1.8" H x 1.8" W x 0.8" D
(4.5 cm H x 4.5 cm W x 2.0 cm D) |
| Device | 1.1" H x 1.6" W x 1.2" D
(2.9 cm H x 4.1 cm W x 3.0 cm D)
(Depth excludes front and rear panel connectors and controls.) |
| Product weight | |
| TP T 15HD A, TP T 15HD AV | 0.8 lbs (0.4 kg) |
| TP T BNC DA4 | 0.9 lbs (0.4 kg) |
| TP T 15HD 45, TP T A 45 | 0.3 lbs (0.1 kg) |
| Shipping weight | 3 lbs (2 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (8.0-100411-D16) |