Home prodotti
USB per AV professionale
USB Matrix Switchers
Bridge AV-USB Switcher di collaborazione USB Matrici USB Extender USB Switcher USB Hub USB Moduli di connettività AV USB Cavi e adattatori USB Prodotti di alimentazione USB Prodotti USB-C
Serie USB Extender xi

Twitter Copia il link

Stampa

Nuovo Pro

Serie USB Extender xi

Extender twisted pair per USB

Caratteristiche principali

Estende periferiche USB fino a 600 m su una rete Gigabit Ethernet
Estende periferiche USB punto-punto fino a 100 m su un unico cavo CATx
Supporta dispositivi High-Speed (USB 2) e precedenti ed è compatibile con dispositivi USB 3 che consentono un funzionamento a date rate High-Speed
Il trasmettitore può essere alimentato dal dispositivo host o dall'alimentatore incluso
Il ricevitore integra un hub a quattro porte con 5 V, 500 mA disponibili su ogni porta
Formati disponibili per montaggio a rack o architetturale
Tutte le caratteristiche

Previous Next

Galleria immagini

Panoramica interattiva

Compare Features

Descrizioni per consulenti

Nota: la serie USB Extender xi non è compatibile con i prodotti della serie USB Extender Plus.

Panoramica
Video
Descrizione
Specifiche
Diagramma
Pannello illustrativo
Download

Panoramica

La serie USB Extender xi permette di estendere e commutare segnali USB da periferiche a un computer host fino a 600 m su una rete Gigabit Ethernet o fino a 100 m punto-punto su un unico cavo CATx. Supporta dispositivi High-Speed (USB 2) e precedenti. Il trasmettitore può essere alimentato dal computer host o dall'alimentatore incluso e integra emulazione periferica USB per consentire l'avvio corretto di un computer host non collegato a tastiera o mouse. Il ricevitore è dotato di un hub attivo a quattro porte incorporato che fornisce fino a 500 mA di alimentazione per porta. Il controller semplifica messa a punto e controllo per un sistema distribuito di commutazione USB a matrice su una rete Ethernet. La serie USB Extender xi supporta periferiche USB come tastiere, mouse, dispositivi di memorizzazione di massa e webcam in ambienti AV professionali.

Video

Descrizione

Specifiche

Diagramma

Pannello illustrativo

Download

Prodotti visionati di recente

Serie USB Extender xi

Descrizioni per consulenti

Selezionare un codice articolo:

Select a Part Number:

Copia testo Copiato Si è verificato un errore. Riprovare più tardi.

USB Extender xi T

Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0, USB 2.0, or USB 1.1 hosts
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type B connector located on the rear panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T (60-1964-12); no alternates or equals.

USB Extender xi T

Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0, USB 2.0, or USB 1.1 hosts
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type B connector located on the rear panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T (60-1964-12); no alternates or equals.

USB Extender xi R

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the rear panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the receiver on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R (60-1964-13); no alternates or equals.

USB Extender xi R

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the rear panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the receiver on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R (60-1964-13); no alternates or equals.

USB Extender xi T D

Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type mini B connector located on the front panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T D (60-1966-12); no alternates or equals.

USB Extender xi T D

Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type mini B connector located on the front panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T D (60-1966-12); no alternates or equals.

USB Extender xi R D

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R D (60-1966-13); no alternates or equals.

USB Extender xi R D

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R D (60-1966-13); no alternates or equals.

USB Extender xi R AAP

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a architectural adapter plate module enclosure that fits within an AV connectivity mounting frame
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R AAP (60-1965-22); no alternates or equals.

USB Extender xi R AAP

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a architectural adapter plate module enclosure that fits within an AV connectivity mounting frame
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R AAP (60-1965-22); no alternates or equals.

USB Extender xi T HID

Provide a transmitter for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type B connector located on the rear panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T HID (60-1967-12); no alternates or equals.

USB Extender xi T HID

Provide a transmitter for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type B connector located on the rear panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T HID (60-1967-12); no alternates or equals.

USB Extender xi R HID

Provide a receiver for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the rear panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the receiver on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus R HID (60-1967-13); no alternates or equals.

USB Extender xi R HID

Provide a receiver for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the rear panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the receiver on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus R HID (60-1967-13); no alternates or equals.

USB Matrix Controller xi

Provide a matrix controller for switching USB signals using up to 64 USB Extender Plus Series or USB Extender xi Series transmitters and receivers connected to USB hosts and peripherals such as human interface devices, imaging devices, mass storage devices, and other USB devices over CATx cable via a Gigabit Ethernet network.
1. Twisted pair matrix controller for up to 64 USB Extender xi Series or USB Extender Plus Series transmitters and receivers
  1. Shall support central control of USB Extender xi and USB Extender Plus transmitters and receivers using CATx cabling connected to an Ethernet network
    1. USB Extender xi and USB Extender Plus transmitters/receivers can only connect to the same model series and will not work between series
  2. Shall support 10/100/100Base-T Ethernet
  3. Shall support Extron PCS software for matrix configuration and loading transmitter and receiver IP address information
  4. Shall support simple SIS commands to control USB switching using an Extron control system or a third party control system
  5. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel for communication with USB Extender xi Series or USB Extender Plus transmitters/receivers and for integration into a control system
  6. Shall provide one (1) bidirectional RS-232 connector on rear panel for integration into a control system
  7. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  8. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1.7 inch (4.3 cm) high, quarter rack width metal enclosure
  2. Shall provide front panel port status indicators for Tx, Rx, RTS, and CTS
  3. Shall be plenum rated to meet UL 2043 standards for heat and smoke release, excluding power supply
  4. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  5. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Matrix Controller xi (60-2022-01); no alternates or equals.

USB Matrix Controller xi

Provide a matrix controller for switching USB signals using up to 64 USB Extender Plus Series or USB Extender xi Series transmitters and receivers connected to USB hosts and peripherals such as human interface devices, imaging devices, mass storage devices, and other USB devices over CATx cable via a Gigabit Ethernet network.
1. Twisted pair matrix controller for up to 64 USB Extender xi Series or USB Extender Plus Series transmitters and receivers
  1. Shall support central control of USB Extender xi and USB Extender Plus transmitters and receivers using CATx cabling connected to an Ethernet network
    1. USB Extender xi and USB Extender Plus transmitters/receivers can only connect to the same model series and will not work between series
  2. Shall support 10/100/100Base-T Ethernet
  3. Shall support Extron PCS software for matrix configuration and loading transmitter and receiver IP address information
  4. Shall support simple SIS commands to control USB switching using an Extron control system or a third party control system
  5. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel for communication with USB Extender xi Series or USB Extender Plus transmitters/receivers and for integration into a control system
  6. Shall provide one (1) bidirectional RS-232 connector on rear panel for integration into a control system
  7. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  8. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1.7 inch (4.3 cm) high, quarter rack width metal enclosure
  2. Shall provide front panel port status indicators for Tx, Rx, RTS, and CTS
  3. Shall be plenum rated to meet UL 2043 standards for heat and smoke release, excluding power supply
  4. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  5. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Matrix Controller xi (60-2022-01); no alternates or equals.

Aggiungi articolo al carrello

Order Message Number

Codice articolo

Nota: I prodotti Extron che usano la presa AC universale accettano molti tipi di prese AC diversi. Prima dell’uso, si assicuri che il dispositivo soddisfi tutti i requisiti normativi per la sua regione e sia conforme con i codici e gli standard locali di sicurezza ed elettrici applicabili.

Q.tà

Totale attuale:

Visualizza carrello

Serie USB Extender xi -

Dettagli del prodotto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Condividi l'articolo via e-mail

Serie USB Extender xi

Extender twisted pair per USB

Invia a: *

La preghiamo di inserire un indirizzo e-mail valido.

Messaggio:

( caratteri rimanenti)

Inviami una copia

Grazie. Il messaggio è stato inviato.

Si è verificato un errore durante l'invio del messaggio. Riprovare più tardi.