Home prodotti
Controllo e automazione
Controller di automazione per spazi di lavoro
App Pacchetti LinkLicense per sistemi di controllo Driver Prodotti eBUS Firmware GlobalViewer Enterprise Processori di controllo IP Link Pro xi Telecomandi IR e pannelli di controllo Controller MediaLink Plus Pannelli di rete NBP Software Touchpanel TouchLink Pro Utility Controllo virtuale
WC Pro 160
HD CTL 100 WC Pro 150 OCS WC Pro 160

Twitter Copia il link

Stampa

Pro

WC Pro 160

Controller di automazione per spazi di lavoro con EDID Minder

Caratteristiche principali

Funzionalità immediatamente operativa che supporta controllo dei display tramite comandi CEC da una porta HDMI
Supporto di risoluzioni video fino a 4K/60 con campionamento 4:4:4
EDID Minder^® gestisce automaticamente la comunicazione EDID fra i dispositivi collegati
Monitoraggio e controllo tramite Ethernet
Pagina web integrata che consente di realizzare configurazioni semplici e scegliere un metodo di controllo dell'alimentazione del display tramite Ethernet, RS-232 o IR
LinkLicense per processore di controllo WC Pro offre numerosi miglioramenti
Tutte le caratteristiche

Previous Next

Galleria immagini

Panoramica interattiva

File di aiuto del prodotto

Descrizioni per consulenti

Attiva un pacchetto LinkLicense

Video dei consigli pratici sul software

Genera una nuova chiave universale di accesso (UAK)

Panoramica
Video
Descrizione
Specifiche
Diagramma
Pannello illustrativo
Download

Panoramica

WC Pro 160 di Extron è un controller di automazione per spazi di lavoro con un formato compatto, supporto Ethernet e tecnologia EDID Minder progettato per un controllo automatizzato dei display in spazi di lavoro di qualsiasi dimensione. Non appena operativo, è sufficiente collegare un segnale attivo all'input HDMI per accendere automaticamente il display. È inoltre possibile utilizzare un sensore di presenza opzionale per avviare il display quando gli utenti entrano nella stanza e spegnerlo se non è rilevato movimento. Se è richiesta personalizzazione aggiuntiva, la pagina web integrata permette di configurare un singolo display tramite Ethernet, RS-232 o IR. WC Pro 160 è alloggiato in un contenitore metallico compatto progettato per essere riposto in maniera ordinata dietro un display o sotto la superficie di un tavolo.

Video

Descrizione

Specifiche

Diagramma

Pannello illustrativo

Download

Prodotti visionati di recente

WC Pro 160

SGK SF3C

WC Pro 160

Descrizioni per consulenti

Selezionare un codice articolo:

Select a Part Number:

Copia testo Copiato Si è verificato un errore. Riprovare più tardi.

WC Pro 160

Provide an automation device for display power control in small to medium sized workspaces
1. CEC enabled automation device for out of the box room display power automation
  1. Provide a 12-volt DC input on a captive screw connector located on the back of the device allowing for power of the device
  2. Provide a female HDMI input located on the back of the device that supports computer and video resolutions up to 4K/60 @ 4:4:4
  3. Provide a female HDMI output located on the back of the device that supports computer and video resolutions up to 4K/60 @ 4:4:4 and features CEC control of the connected display if supported
  4. Provide a five-pole captive screw connector for de-embedded HDMI analog audio
  5. Device shall include a way to manage the EDID settings to ensure that the connected display shows the proper output regardless of the source used
  6. Provide a configurable RS-232 port on captive screw connectors located on the back of the device that can be configured for unidirectional or bidirectional control of AV system components
  7. Provide an IR port on captive screw connector located on the back of the device for auxiliary AV device control. This port shall allow the control of two devices using a dual IR emitter.
  8. Provide two digital I/O’s on a captive screw connector located on the back of the device that can be used to interface with devices such as sensors, switches, LEDs, and relays
  9. Provide a 24-volt DC output on a captive screw connector located on the back of the device that can be used to power auxiliary devices such as a room occupancy sensor
  10. Device shall have a female RJ-45 jack located on the back it that supports 10/100Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues as well as supports PoE- Power over Ethernet, 802.3af
  11. Provide front panel LED activity indicators for power status, HDMI and HDCP signal presence, RS-232 status, IR status, digital I/O status, CEC status and network status
  12. Provide a multi-function button located on the front of the device that allows for resetting to its default configuration or to factory firmware defaults
  13. Device shall include Extron LockIt® HDMI cable lacing brackets
  14. Device shall support the addition of an Extron LinkLicense® for WC Control Processor
    1. Device shall support the use of TouchLink Pro touchpanels and Network Button Panels
  15. Device shall have at least 8 GB of nonvolatile memory.
  16. Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment.
  17. Device shall support the following protocols: DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
  18. Device shall support the addition of an Extron LinkLicense® for user interfaces
2. Mounting requirements
  1. Device shall be housed in a one-inch high 3/8 rack width designed for placement behind a display, above a projector or under a table
  2. Device shall be rack mountable using an optional rack shelf
  3. Device shall be able to be installed under a table, desk, or other flat surface using an included mounting kit
3. Software requirements
  1. The device may be configured using Extron’s Global Configurator Plus or Professional once Extron Control for WC Control Processor is applied
  2. Display drivers can be obtained directly from the built-in webpage or through Extron support resources and database
  3. Shall be configured by an Extron authorized user
  4. The device’s configuration and settings shall be managed using Extron’s Toolbelt software
  5. The device's A/V settings and EDID shall be managed using Extron's PCS software
4. Security Requirements
  1. Device shall support SFTP and SSH for secure communication between the automation device and a TouchLink Pro touchpanel or Network Button Panel
  2. Device shall support HTTPS and SSH for secure communication between the automation device and Extron Control App
  3. Device shall support HTTPS for secure communication between the automation device and Extron Control for Web
  4. Device shall support SFTP and SSH for secure communication between the automation device and the configuration software
  5. Device shall provide the option to modify administrator and user credentials
  6. Device shall support security updates to maintain network health.
  7. Device shall require a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
  8. Device shall support the installation of an owner furnished certificate with the following properties:
    1. Certificates shall include x.509 support
    2. Certificates shall include public / private key exchange
    3. Certificates shall support PEM encoding
  9. Extron shall furnish documentation that describes all supported network ports and services
5. Shall meet regulatory compliances
  1. CE
  2. c-UL
  3. UL
  4. C-Tick
  5. FCC Class A
  6. ICES
  7. VCCI Class A
  8. RoHs
  9. WEEE
  10. Device shall be UL listed for use in plenum air handling spaces: meets UL 2043 for heat and smoke release
6. Product Warranty
  1. Shall provide at least 3 years parts and labor
7. Approved device shall be the Extron WC Pro 160, part number 60-1804-01, no alternates or equals

WC Pro 160

Provide an automation device for display power control in small to medium sized workspaces
1. CEC enabled automation device for out of the box room display power automation
  1. Provide a 12-volt DC input on a captive screw connector located on the back of the device allowing for power of the device
  2. Provide a female HDMI input located on the back of the device that supports computer and video resolutions up to 4K/60 @ 4:4:4
  3. Provide a female HDMI output located on the back of the device that supports computer and video resolutions up to 4K/60 @ 4:4:4 and features CEC control of the connected display if supported
  4. Provide a five-pole captive screw connector for de-embedded HDMI analog audio
  5. Device shall include a way to manage the EDID settings to ensure that the connected display shows the proper output regardless of the source used
  6. Provide a configurable RS-232 port on captive screw connectors located on the back of the device that can be configured for unidirectional or bidirectional control of AV system components
  7. Provide an IR port on captive screw connector located on the back of the device for auxiliary AV device control. This port shall allow the control of two devices using a dual IR emitter.
  8. Provide two digital I/O’s on a captive screw connector located on the back of the device that can be used to interface with devices such as sensors, switches, LEDs, and relays
  9. Provide a 24-volt DC output on a captive screw connector located on the back of the device that can be used to power auxiliary devices such as a room occupancy sensor
  10. Device shall have a female RJ-45 jack located on the back it that supports 10/100Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues as well as supports PoE- Power over Ethernet, 802.3af
  11. Provide front panel LED activity indicators for power status, HDMI and HDCP signal presence, RS-232 status, IR status, digital I/O status, CEC status and network status
  12. Provide a multi-function button located on the front of the device that allows for resetting to its default configuration or to factory firmware defaults
  13. Device shall include Extron LockIt® HDMI cable lacing brackets
  14. Device shall support the addition of an Extron LinkLicense® for WC Control Processor
    1. Device shall support the use of TouchLink Pro touchpanels and Network Button Panels
  15. Device shall have at least 8 GB of nonvolatile memory.
  16. Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment.
  17. Device shall support the following protocols: DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
  18. Device shall support the addition of an Extron LinkLicense® for user interfaces
2. Mounting requirements
  1. Device shall be housed in a one-inch high 3/8 rack width designed for placement behind a display, above a projector or under a table
  2. Device shall be rack mountable using an optional rack shelf
  3. Device shall be able to be installed under a table, desk, or other flat surface using an included mounting kit
3. Software requirements
  1. The device may be configured using Extron’s Global Configurator Plus or Professional once Extron Control for WC Control Processor is applied
  2. Display drivers can be obtained directly from the built-in webpage or through Extron support resources and database
  3. Shall be configured by an Extron authorized user
  4. The device’s configuration and settings shall be managed using Extron’s Toolbelt software
  5. The device's A/V settings and EDID shall be managed using Extron's PCS software
4. Security Requirements
  1. Device shall support SFTP and SSH for secure communication between the automation device and a TouchLink Pro touchpanel or Network Button Panel
  2. Device shall support HTTPS and SSH for secure communication between the automation device and Extron Control App
  3. Device shall support HTTPS for secure communication between the automation device and Extron Control for Web
  4. Device shall support SFTP and SSH for secure communication between the automation device and the configuration software
  5. Device shall provide the option to modify administrator and user credentials
  6. Device shall support security updates to maintain network health.
  7. Device shall require a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
  8. Device shall support the installation of an owner furnished certificate with the following properties:
    1. Certificates shall include x.509 support
    2. Certificates shall include public / private key exchange
    3. Certificates shall support PEM encoding
  9. Extron shall furnish documentation that describes all supported network ports and services
5. Shall meet regulatory compliances
  1. CE
  2. c-UL
  3. UL
  4. C-Tick
  5. FCC Class A
  6. ICES
  7. VCCI Class A
  8. RoHs
  9. WEEE
  10. Device shall be UL listed for use in plenum air handling spaces: meets UL 2043 for heat and smoke release
6. Product Warranty
  1. Shall provide at least 3 years parts and labor
7. Approved device shall be the Extron WC Pro 160, part number 60-1804-01, no alternates or equals

Aggiungi articolo al carrello

Order Message Number

Codice articolo

Nota: I prodotti Extron che usano la presa AC universale accettano molti tipi di prese AC diversi. Prima dell’uso, si assicuri che il dispositivo soddisfi tutti i requisiti normativi per la sua regione e sia conforme con i codici e gli standard locali di sicurezza ed elettrici applicabili.

Q.tà

Totale attuale:

Visualizza carrello

WC Pro 160 -

Dettagli del prodotto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Condividi l'articolo via e-mail

WC Pro 160

Controller di automazione per spazi di lavoro con EDID Minder

Invia a: *

La preghiamo di inserire un indirizzo e-mail valido.

Messaggio:

( caratteri rimanenti)

Inviami una copia

Grazie. Il messaggio è stato inviato.

Si è verificato un errore durante l'invio del messaggio. Riprovare più tardi.