Home prodotti
DSP, espansione e software
Pannelli di controllo audio
Prodotti DSP audio Software DSP Interfacce di espansione
ACP 100
ACP 100 ACP VC1 D ACP VC1 EU

Twitter Copia il link

Stampa

Pro

ACP 100

Pannello di controllo audio con manopola volume e 6 pulsanti – Due gang USA

Caratteristiche principali

Pannello a pulsanti completamente configurabile che si integra facilmente con un processore audio DSP della serie DMP Plus di Extron
Sei pulsanti retroilluminati bicolore personalizzabili
Due porte ACP consentono di espandere e aggiornare rapidamente il sistema
È possibile utilizzare un singolo pannello a pulsanti o combinare fino a otto pannelli per rispondere alle esigenze di un'ampia gamma di progettazioni di sistema
Design semplice e al contempo elegante che si abbina all'estetica di qualsiasi soluzione architetturale
Collegamento diretto alla serie DMP Plus
Tutte le caratteristiche

Previous Next

Galleria immagini

Panoramica interattiva

Video in primo piano

Descrizioni per consulenti

Calcolatore di alimentazione ACP

Panoramica
Video
Descrizione
Specifiche
Diagramma
Pannello illustrativo
Download

Panoramica

ACP 100 è un pannello di controllo audio configurabile che si interfaccia con i processori audio della serie DMP Plus. Consente di regolare il volume per mixaggio e controllo delle zone audio, oltre a richiamo di preset o macro per configurazione ambientale. È possibile installare fino a otto pannelli di controllo della serie ACP in vari punti di uno spazio meeting e collegarli fra loro. Ciascun pannello può essere utilizzato per controllo indipendente di una zona audio specifica o per regolare le impostazioni audio dell'intero spazio combinato. ACP 100 è caratterizzato da sei pulsanti bicolore retroilluminati per agevolare l'utilizzo in ambienti scarsamente illuminati e da una manopola di controllo del volume che consente di effettuare regolazioni precise e scorrevoli. Può essere configurato con facilità utilizzando il software DSP Configurator di Extron. ACP 100 è installabile in una scatola di derivazione da due gang USA e include frontalini bianchi e neri.

Video

Descrizione

Specifiche

Diagramma

Pannello illustrativo

Download

Prodotti visionati di recente

ACP 100

UCS 504

ACP 100

Descrizioni per consulenti

Selezionare un codice articolo:

Select a Part Number:

Copia testo Copiato Si è verificato un errore. Riprovare più tardi.

ACP 100

Provide a two-gang button panel for the purpose of remotely controlling, monitoring and troubleshooting connected DMP 128 Plus Digital Matrix Processors.
1. Fully-configurable ACP button panel interface.
  1. Device shall have a total of six customizable dual color LED backlit buttons.
    1. Buttons shall illuminate white or red, depending on function, for ease of use in low-light environments.
    2. Buttons shall feature two levels of illumination, dim and bright
    3. Buttons shall feature removable button caps allowing them to be custom labeled for easy identification.
  2. Device shall provide a rotary encoder knob located in the bottom left of the panel that can be configured to control any Gain Group on the DMP 128 Plus Digital Matrix Processor.
  3. Device shall feature eight white LEDs arranged vertically located adjacent to the rotary encoder. When configured, these LEDs shall provide visual feedback to reflect the gain setting of the Gain Group associated with the rotary encoder.
  4. Provides two ACP ports on the rear panel that accept 4-pole, 3.5mm captive screw connectors, for power and communication via the connection to a DMP 128 Plus Digital Matrix Processor.
    1. These ports are also used to add additional ACP panels in a Daisy Chain.
  5. Device shall feature a 6-pole dip switch for assigning a unique Bus ID to the button panel.
  6. Device shall include a reset button that resets the device back to original factory settings.
  7. Device shall feature a diagnostic status LED that will be used as a visual indication that the ACP panel is communicating properly with the DMP 128 Plus Digital Matrix Processor.
  8. Device shall be Section 508 compliant and shall meet or exceed U.S. accessibility standards for Electronic Information Technology.
  9. Device may be wired using a Daisy Chain topology.
    1. The cable length of a Daisy Chain may not exceed a sum total 1,000 feet.
  10. ACP supports up to eight panels per one DMP 128 Plus Digital Matrix Processor.
  11. ACP supports the following cabling types:
    1. Extron STP20-2 Cable
    2. CAT5e or CAT 6 cable, the cable must be 23 AWG solid copper wire.
  12. ACP supports power and communication over a single cable.
  13. Supports configuration and setup by Extron DSP Configurator Software.
2. Mounting requirements
  1. Device shall have the ability to be mounted directly in a wall, lectern, or other flat surface and shall be able to be secured using the supplied mud ring and hardware.
  2. Device shall have the ability to be mounted to the surface of a wall using an optional wall box.
  3. Device shall include both white and black faceplates.
3. Software requirements
  1. Device shall be configured using DSP Configurator:
    1. Buttons will support the following button actions:
      1. Group Mute On/Off
      2. Group Volume Up/Down
      3. Preset Recall/Toggle
      4. Macro Recall/Toggle
      5. Shall meet regulatory compliances
      6. CE
  2. c-UL
  3. C-tick
  4. FCC Class A
  5. ICES
  6. RoHS
  7. UL
  8. VCCI Class A
  9. WEEE
  10. Section 508 of the Rehabilitation Act (29 U.S.C. 964d)
4. Product Warranty
  1. Shall provide 3 years parts and labor
5. Approved device shall be the Extron ACP 100 part number 60-1643-03; no alternates or equals

ACP 100

Provide a two-gang button panel for the purpose of remotely controlling, monitoring and troubleshooting connected DMP 128 Plus Digital Matrix Processors.
1. Fully-configurable ACP button panel interface.
  1. Device shall have a total of six customizable dual color LED backlit buttons.
    1. Buttons shall illuminate white or red, depending on function, for ease of use in low-light environments.
    2. Buttons shall feature two levels of illumination, dim and bright
    3. Buttons shall feature removable button caps allowing them to be custom labeled for easy identification.
  2. Device shall provide a rotary encoder knob located in the bottom left of the panel that can be configured to control any Gain Group on the DMP 128 Plus Digital Matrix Processor.
  3. Device shall feature eight white LEDs arranged vertically located adjacent to the rotary encoder. When configured, these LEDs shall provide visual feedback to reflect the gain setting of the Gain Group associated with the rotary encoder.
  4. Provides two ACP ports on the rear panel that accept 4-pole, 3.5mm captive screw connectors, for power and communication via the connection to a DMP 128 Plus Digital Matrix Processor.
    1. These ports are also used to add additional ACP panels in a Daisy Chain.
  5. Device shall feature a 6-pole dip switch for assigning a unique Bus ID to the button panel.
  6. Device shall include a reset button that resets the device back to original factory settings.
  7. Device shall feature a diagnostic status LED that will be used as a visual indication that the ACP panel is communicating properly with the DMP 128 Plus Digital Matrix Processor.
  8. Device shall be Section 508 compliant and shall meet or exceed U.S. accessibility standards for Electronic Information Technology.
  9. Device may be wired using a Daisy Chain topology.
    1. The cable length of a Daisy Chain may not exceed a sum total 1,000 feet.
  10. ACP supports up to eight panels per one DMP 128 Plus Digital Matrix Processor.
  11. ACP supports the following cabling types:
    1. Extron STP20-2 Cable
    2. CAT5e or CAT 6 cable, the cable must be 23 AWG solid copper wire.
  12. ACP supports power and communication over a single cable.
  13. Supports configuration and setup by Extron DSP Configurator Software.
2. Mounting requirements
  1. Device shall have the ability to be mounted directly in a wall, lectern, or other flat surface and shall be able to be secured using the supplied mud ring and hardware.
  2. Device shall have the ability to be mounted to the surface of a wall using an optional wall box.
  3. Device shall include both white and black faceplates.
3. Software requirements
  1. Device shall be configured using DSP Configurator:
    1. Buttons will support the following button actions:
      1. Group Mute On/Off
      2. Group Volume Up/Down
      3. Preset Recall/Toggle
      4. Macro Recall/Toggle
      5. Shall meet regulatory compliances
      6. CE
  2. c-UL
  3. C-tick
  4. FCC Class A
  5. ICES
  6. RoHS
  7. UL
  8. VCCI Class A
  9. WEEE
  10. Section 508 of the Rehabilitation Act (29 U.S.C. 964d)
4. Product Warranty
  1. Shall provide 3 years parts and labor
5. Approved device shall be the Extron ACP 100 part number 60-1643-03; no alternates or equals

Aggiungi articolo al carrello

Order Message Number

Codice articolo

Nota: I prodotti Extron che usano la presa AC universale accettano molti tipi di prese AC diversi. Prima dell’uso, si assicuri che il dispositivo soddisfi tutti i requisiti normativi per la sua regione e sia conforme con i codici e gli standard locali di sicurezza ed elettrici applicabili.

Q.tà

Totale attuale:

Visualizza carrello

ACP 100 -

Dettagli del prodotto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Condividi l'articolo via e-mail

ACP 100

Pannello di controllo audio con manopola volume e 6 pulsanti – Due gang USA

Invia a: *

La preghiamo di inserire un indirizzo e-mail valido.

Messaggio:

( caratteri rimanenti)

Inviami una copia

Grazie. Il messaggio è stato inviato.

Si è verificato un errore durante l'invio del messaggio. Riprovare più tardi.