Home prodotti
Fibra ottica
Cavi pre-assemblati in fibra ottica
Extender in fibra ottica Trasmettitori di commutazione universale Extender DisplayPort Extender HDMI Extender DVI Extender USB Accessori Switcher in fibra ottica Matrici in fibra ottica Bobine di cavi in fibra ottica Connettori ed accessori per fibra ottica
2LC OM4 MM P
2LC OM4 MM P 2LC SM P

Twitter Copia il link

Stampa

Pro

2LC OM4 MM P

Cavi preassemblati in fibra ottica multimodale ottimizzata per laser da LC a LC - Plenum

Caratteristiche principali

Fibra multimodale OM4 ottimizzata per laser
Fibra insensibile alle curvature
Rivestimento esterno OFNP certificato plenum
Costruzione durevole del cavo duplex zip-cord
Terminati con connettori standard LC
Lunghezze disponibili da 1 m a 60 m
Tutte le caratteristiche

Galleria immagini

Panoramica interattiva

Descrizioni per consulenti

Panoramica
Video
Descrizione
Specifiche
Diagramma
Pannello illustrativo
Download

Panoramica

I cavi pre-assemblati duplex in fibra ottica multimodale 2LC OM4 MM P di Extron sono disponibili in varie lunghezze da 1 m a 60 m. Ideale per distanze fino a 2 km, la fibra multimodale ottimizzata per laser di Extron offre una larghezza di banda superiore e assicura una trasmissione pixel per pixel di segnali video ad alta risoluzione, audio e controllo. La fibra 2LC OM4 MM P è insensibile alle curvature ed è caratterizzata da un raggio di curvatura ridotto che minimizza la perdita legata alla flessione e semplifica l'installazione. Le prestazioni OM4 ottimizzate per laser garantiscono un'infrastruttura AV di cavi in fibra ottica in grado di supportare le risoluzioni più elevate.

Video

Descrizione

Specifiche

Diagramma

Pannello illustrativo

Download

Prodotti visionati di recente

2LC OM4 MM P

Descrizioni per consulenti

Selezionare un codice articolo:

Select a Part Number:

Copia testo Copiato Si è verificato un errore. Riprovare più tardi.

2LC OM4 MM P/1

Provide interconnection for the transmission of high-speed optical digital signals over a duplex multimode fiber optic cable assembly
1. Duplex multimode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 50/125 µm graded-index, bend-insensitive, laser-optimized multimode fibers
    1. Glass fiber core diameter of 50 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed OM4 laser-optimized multimode fiber performance standards
    1. TIA 492-AAAD
    2. IEC 60793-2-10, A1a.3
    3. ISO/IEC 11801, OM4
  2. Shall provide attenuation of less than 3.0 dB per kilometer at an 850 nm wavelength
  3. Shall provide attenuation of less than 1.2 dB per kilometer at a 1300 nm wavelength
  4. Shall provide an insertion loss of less than 0.5 dB per 300 meters at 850 nm or 1300 nm
  5. Shall provide minimum effective mode bandwidth of 4700 MHz-km at an 850 nm wavelength
  6. Shall provide minimum overfill launch bandwidth of 3500 MHz-km at an 850 nm wavelength
  7. Shall provide minimum overfill launch bandwidth of 550 MHz-km at a 1300 nm wavelength
  8. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a one (1) meter (3.3 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC OM4 MM P/1 (part number 26-671-01), no alternates or equals

2LC OM4 MM P/1

Provide interconnection for the transmission of high-speed optical digital signals over a duplex multimode fiber optic cable assembly
1. Duplex multimode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 50/125 µm graded-index, bend-insensitive, laser-optimized multimode fibers
    1. Glass fiber core diameter of 50 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed OM4 laser-optimized multimode fiber performance standards
    1. TIA 492-AAAD
    2. IEC 60793-2-10, A1a.3
    3. ISO/IEC 11801, OM4
  2. Shall provide attenuation of less than 3.0 dB per kilometer at an 850 nm wavelength
  3. Shall provide attenuation of less than 1.2 dB per kilometer at a 1300 nm wavelength
  4. Shall provide an insertion loss of less than 0.5 dB per 300 meters at 850 nm or 1300 nm
  5. Shall provide minimum effective mode bandwidth of 4700 MHz-km at an 850 nm wavelength
  6. Shall provide minimum overfill launch bandwidth of 3500 MHz-km at an 850 nm wavelength
  7. Shall provide minimum overfill launch bandwidth of 550 MHz-km at a 1300 nm wavelength
  8. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a one (1) meter (3.3 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC OM4 MM P/1 (part number 26-671-01), no alternates or equals

2LC OM4 MM P/2

Provide interconnection for the transmission of high-speed optical digital signals over a duplex multimode fiber optic cable assembly
1. Duplex multimode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 50/125 µm graded-index, bend-insensitive, laser-optimized multimode fibers
    1. Glass fiber core diameter of 50 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed OM4 laser-optimized multimode fiber performance standards
    1. TIA 492-AAAD
    2. IEC 60793-2-10, A1a.3
    3. ISO/IEC 11801, OM4
  2. Shall provide attenuation of less than 3.0 dB per kilometer at an 850 nm wavelength
  3. Shall provide attenuation of less than 1.2 dB per kilometer at a 1300 nm wavelength
  4. Shall provide an insertion loss of less than 0.5 dB per 300 meters at 850 nm or 1300 nm
  5. Shall provide minimum effective mode bandwidth of 4700 MHz-km at an 850 nm wavelength
  6. Shall provide minimum overfill launch bandwidth of 3500 MHz-km at an 850 nm wavelength
  7. Shall provide minimum overfill launch bandwidth of 550 MHz-km at a 1300 nm wavelength
  8. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a two (2) meter 6.6 (foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC OM4 MM P/2 (part number 26-671-02), no alternates or equals

2LC OM4 MM P/2

Provide interconnection for the transmission of high-speed optical digital signals over a duplex multimode fiber optic cable assembly
1. Duplex multimode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 50/125 µm graded-index, bend-insensitive, laser-optimized multimode fibers
    1. Glass fiber core diameter of 50 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed OM4 laser-optimized multimode fiber performance standards
    1. TIA 492-AAAD
    2. IEC 60793-2-10, A1a.3
    3. ISO/IEC 11801, OM4
  2. Shall provide attenuation of less than 3.0 dB per kilometer at an 850 nm wavelength
  3. Shall provide attenuation of less than 1.2 dB per kilometer at a 1300 nm wavelength
  4. Shall provide an insertion loss of less than 0.5 dB per 300 meters at 850 nm or 1300 nm
  5. Shall provide minimum effective mode bandwidth of 4700 MHz-km at an 850 nm wavelength
  6. Shall provide minimum overfill launch bandwidth of 3500 MHz-km at an 850 nm wavelength
  7. Shall provide minimum overfill launch bandwidth of 550 MHz-km at a 1300 nm wavelength
  8. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a two (2) meter 6.6 (foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC OM4 MM P/2 (part number 26-671-02), no alternates or equals

2LC OM4 MM P/3

Provide interconnection for the transmission of high-speed optical digital signals over a duplex multimode fiber optic cable assembly
1. Duplex multimode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 50/125 µm graded-index, bend-insensitive, laser-optimized multimode fibers
    1. Glass fiber core diameter of 50 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed OM4 laser-optimized multimode fiber performance standards
    1. TIA 492-AAAD
    2. IEC 60793-2-10, A1a.3
    3. ISO/IEC 11801, OM4
  2. Shall provide attenuation of less than 3.0 dB per kilometer at an 850 nm wavelength
  3. Shall provide attenuation of less than 1.2 dB per kilometer at a 1300 nm wavelength
  4. Shall provide an insertion loss of less than 0.5 dB per 300 meters at 850 nm or 1300 nm
  5. Shall provide minimum effective mode bandwidth of 4700 MHz-km at an 850 nm wavelength
  6. Shall provide minimum overfill launch bandwidth of 3500 MHz-km at an 850 nm wavelength
  7. Shall provide minimum overfill launch bandwidth of 550 MHz-km at a 1300 nm wavelength
  8. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a three (3) meter (9.8 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC OM4 MM P/3 (part number 26-671-03), no alternates or equals

2LC OM4 MM P/3

Provide interconnection for the transmission of high-speed optical digital signals over a duplex multimode fiber optic cable assembly
1. Duplex multimode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 50/125 µm graded-index, bend-insensitive, laser-optimized multimode fibers
    1. Glass fiber core diameter of 50 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed OM4 laser-optimized multimode fiber performance standards
    1. TIA 492-AAAD
    2. IEC 60793-2-10, A1a.3
    3. ISO/IEC 11801, OM4
  2. Shall provide attenuation of less than 3.0 dB per kilometer at an 850 nm wavelength
  3. Shall provide attenuation of less than 1.2 dB per kilometer at a 1300 nm wavelength
  4. Shall provide an insertion loss of less than 0.5 dB per 300 meters at 850 nm or 1300 nm
  5. Shall provide minimum effective mode bandwidth of 4700 MHz-km at an 850 nm wavelength
  6. Shall provide minimum overfill launch bandwidth of 3500 MHz-km at an 850 nm wavelength
  7. Shall provide minimum overfill launch bandwidth of 550 MHz-km at a 1300 nm wavelength
  8. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a three (3) meter (9.8 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC OM4 MM P/3 (part number 26-671-03), no alternates or equals

2LC OM4 MM P/5

Provide interconnection for the transmission of high-speed optical digital signals over a duplex multimode fiber optic cable assembly
1. Duplex multimode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 50/125 µm graded-index, bend-insensitive, laser-optimized multimode fibers
    1. Glass fiber core diameter of 50 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed OM4 laser-optimized multimode fiber performance standards
    1. TIA 492-AAAD
    2. IEC 60793-2-10, A1a.3
    3. ISO/IEC 11801, OM4
  2. Shall provide attenuation of less than 3.0 dB per kilometer at an 850 nm wavelength
  3. Shall provide attenuation of less than 1.2 dB per kilometer at a 1300 nm wavelength
  4. Shall provide an insertion loss of less than 0.5 dB per 300 meters at 850 nm or 1300 nm
  5. Shall provide minimum effective mode bandwidth of 4700 MHz-km at an 850 nm wavelength
  6. Shall provide minimum overfill launch bandwidth of 3500 MHz-km at an 850 nm wavelength
  7. Shall provide minimum overfill launch bandwidth of 550 MHz-km at a 1300 nm wavelength
  8. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a five (5) meter (16.4 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC OM4 MM P/5 (part number 26-671-05), no alternates or equals

2LC OM4 MM P/5

Provide interconnection for the transmission of high-speed optical digital signals over a duplex multimode fiber optic cable assembly
1. Duplex multimode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 50/125 µm graded-index, bend-insensitive, laser-optimized multimode fibers
    1. Glass fiber core diameter of 50 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed OM4 laser-optimized multimode fiber performance standards
    1. TIA 492-AAAD
    2. IEC 60793-2-10, A1a.3
    3. ISO/IEC 11801, OM4
  2. Shall provide attenuation of less than 3.0 dB per kilometer at an 850 nm wavelength
  3. Shall provide attenuation of less than 1.2 dB per kilometer at a 1300 nm wavelength
  4. Shall provide an insertion loss of less than 0.5 dB per 300 meters at 850 nm or 1300 nm
  5. Shall provide minimum effective mode bandwidth of 4700 MHz-km at an 850 nm wavelength
  6. Shall provide minimum overfill launch bandwidth of 3500 MHz-km at an 850 nm wavelength
  7. Shall provide minimum overfill launch bandwidth of 550 MHz-km at a 1300 nm wavelength
  8. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a five (5) meter (16.4 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC OM4 MM P/5 (part number 26-671-05), no alternates or equals

2LC OM4 MM P/10

Provide interconnection for the transmission of high-speed optical digital signals over a duplex multimode fiber optic cable assembly
1. Duplex multimode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 50/125 µm graded-index, bend-insensitive, laser-optimized multimode fibers
    1. Glass fiber core diameter of 50 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed OM4 laser-optimized multimode fiber performance standards
    1. TIA 492-AAAD
    2. IEC 60793-2-10, A1a.3
    3. ISO/IEC 11801, OM4
  2. Shall provide attenuation of less than 3.0 dB per kilometer at an 850 nm wavelength
  3. Shall provide attenuation of less than 1.2 dB per kilometer at a 1300 nm wavelength
  4. Shall provide an insertion loss of less than 0.5 dB per 300 meters at 850 nm or 1300 nm
  5. Shall provide minimum effective mode bandwidth of 4700 MHz-km at an 850 nm wavelength
  6. Shall provide minimum overfill launch bandwidth of 3500 MHz-km at an 850 nm wavelength
  7. Shall provide minimum overfill launch bandwidth of 550 MHz-km at a 1300 nm wavelength
  8. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a ten (10) meter (32.8 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC OM4 MM P/10 (part number 26-671-10), no alternates or equals

2LC OM4 MM P/10

Provide interconnection for the transmission of high-speed optical digital signals over a duplex multimode fiber optic cable assembly
1. Duplex multimode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 50/125 µm graded-index, bend-insensitive, laser-optimized multimode fibers
    1. Glass fiber core diameter of 50 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed OM4 laser-optimized multimode fiber performance standards
    1. TIA 492-AAAD
    2. IEC 60793-2-10, A1a.3
    3. ISO/IEC 11801, OM4
  2. Shall provide attenuation of less than 3.0 dB per kilometer at an 850 nm wavelength
  3. Shall provide attenuation of less than 1.2 dB per kilometer at a 1300 nm wavelength
  4. Shall provide an insertion loss of less than 0.5 dB per 300 meters at 850 nm or 1300 nm
  5. Shall provide minimum effective mode bandwidth of 4700 MHz-km at an 850 nm wavelength
  6. Shall provide minimum overfill launch bandwidth of 3500 MHz-km at an 850 nm wavelength
  7. Shall provide minimum overfill launch bandwidth of 550 MHz-km at a 1300 nm wavelength
  8. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a ten (10) meter (32.8 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC OM4 MM P/10 (part number 26-671-10), no alternates or equals

2LC OM4 MM P/30

Provide interconnection for the transmission of high-speed optical digital signals over a duplex multimode fiber optic cable assembly
1. Duplex multimode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 50/125 µm graded-index, bend-insensitive, laser-optimized multimode fibers
    1. Glass fiber core diameter of 50 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed OM4 laser-optimized multimode fiber performance standards
    1. TIA 492-AAAD
    2. IEC 60793-2-10, A1a.3
    3. ISO/IEC 11801, OM4
  2. Shall provide attenuation of less than 3.0 dB per kilometer at an 850 nm wavelength
  3. Shall provide attenuation of less than 1.2 dB per kilometer at a 1300 nm wavelength
  4. Shall provide an insertion loss of less than 0.5 dB per 300 meters at 850 nm or 1300 nm
  5. Shall provide minimum effective mode bandwidth of 4700 MHz-km at an 850 nm wavelength
  6. Shall provide minimum overfill launch bandwidth of 3500 MHz-km at an 850 nm wavelength
  7. Shall provide minimum overfill launch bandwidth of 550 MHz-km at a 1300 nm wavelength
  8. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a thirty (30) meter (98.4 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC OM4 MM P/30 (part number 26-671-30), no alternates or equals

2LC OM4 MM P/30

Provide interconnection for the transmission of high-speed optical digital signals over a duplex multimode fiber optic cable assembly
1. Duplex multimode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 50/125 µm graded-index, bend-insensitive, laser-optimized multimode fibers
    1. Glass fiber core diameter of 50 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed OM4 laser-optimized multimode fiber performance standards
    1. TIA 492-AAAD
    2. IEC 60793-2-10, A1a.3
    3. ISO/IEC 11801, OM4
  2. Shall provide attenuation of less than 3.0 dB per kilometer at an 850 nm wavelength
  3. Shall provide attenuation of less than 1.2 dB per kilometer at a 1300 nm wavelength
  4. Shall provide an insertion loss of less than 0.5 dB per 300 meters at 850 nm or 1300 nm
  5. Shall provide minimum effective mode bandwidth of 4700 MHz-km at an 850 nm wavelength
  6. Shall provide minimum overfill launch bandwidth of 3500 MHz-km at an 850 nm wavelength
  7. Shall provide minimum overfill launch bandwidth of 550 MHz-km at a 1300 nm wavelength
  8. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a thirty (30) meter (98.4 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC OM4 MM P/30 (part number 26-671-30), no alternates or equals

Aggiungi articolo al carrello

Order Message Number

Codice articolo

Nota: I prodotti Extron che usano la presa AC universale accettano molti tipi di prese AC diversi. Prima dell’uso, si assicuri che il dispositivo soddisfi tutti i requisiti normativi per la sua regione e sia conforme con i codici e gli standard locali di sicurezza ed elettrici applicabili.

Q.tà

Totale attuale:

Visualizza carrello

2LC OM4 MM P -

Dettagli del prodotto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Condividi l'articolo via e-mail

2LC OM4 MM P

Cavi preassemblati in fibra ottica multimodale ottimizzata per laser da LC a LC - Plenum

Invia a: *

La preghiamo di inserire un indirizzo e-mail valido.

Messaggio:

( caratteri rimanenti)

Inviami una copia

Grazie. Il messaggio è stato inviato.

Si è verificato un errore durante l'invio del messaggio. Riprovare più tardi.