Home prodotti
Amplificatori
Amplificatori
Amplificatori di rete Amplificatore PoE
XPA 4002
MPA 152 Plus MPA 601 XPA 1002 XPA 2001 XPA 2004 XPA 4002 XPA U 1002 XPA U 1004 XPA U 1004 SB XPA U 2002 SB XPA U 2004 FX XPA U 2008 FX XPA U 3502 XPA U 358 XPA U 358C XPA U 4004 FX XPA U 758

Twitter Copia il link

Stampa

Pro

XPA 4002

Amplificatore a due canali - 400 W per canale

Caratteristiche principali

Potenza in uscita 800 W rms:
XPA 4002: 2 x 400 W su 4 Ω, 2 x 200 W su 8 Ω o 1 x 800 W su 8 Ω (collegato a ponte)
XPA 4002-70V: 2 x 400 W su 70 V
Soddisfa i requisiti del livello Ecofficient^® 3
Prestazioni segnale/rumore e THD+N di grado professionale
Tecnologia brevettata Extron CDRS™ (Class D Ripple Suppression)
Raffreddamento per convezione senza ventole
Corrente di chiamata estremamente bassa: sequenziamento dell'alimentazione non necessario
Tutte le caratteristiche

Previous Next

Galleria immagini

Caratteristiche a confronto

Descrizioni per consulenti

Casi studio esemplificativi

Strumento di selezione degli amplificatori

Questo nuovo strumento vi consente ora di cercare i modelli di amplificatore in base alle caratteristiche

Calcolatori audio

Panoramica
Video
Descrizione
Specifiche
Diagramma
Pannello illustrativo
Download

Panoramica

XPA 4002 della serie XTRA™ di Extron è un amplificatore 1U raffreddato a convezione che fornisce due canali da 400 W rms. Questo amplificatore di grado professionale è caratterizzato da un rapporto segnale/rumore di 100 dB con THD+N di 0,1%. XPA 4002 è un amplificatore di livello Ecofficient 3 caratterizzato dall'avanzato design Classe D ad alta efficienza esclusivo di Extron. Presenta inoltre tecnologia brevettata CDRS™ (Class D Ripple Suppression) che fornisce un audio limpido e uniforme e un miglioramento nella fedeltà del segnale rispetto al design convenzionale degli amplificatori di Classe D. Le dimensioni di XPA 4002 sono la metà rispetto a amplificatori simili e permettono di risparmiare spazio a rack, a fronte di un peso di soli 4 kg. L'esclusivo design Extron ad alta efficienza genera una quantità minima di calore e permette un raffreddamento per convezione dell'amplificatore.

Video

Descrizione

Specifiche

Diagramma

Pannello illustrativo

Download

Prodotti visionati di recente

XPA 4002

SVEQ 100 D

Cable Collar Kit

XPA 4002

Descrizioni per consulenti

Selezionare un codice articolo:

Select a Part Number:

Copia testo Copiato Si è verificato un errore. Riprovare più tardi.

XPA 4002

Provide a compact, energy efficient audio amplifier that shall support two analog inputs and two amplified outputs with 200 or 400 watts rms power output per channel.
1. Compact stereo amplifier with 200 or 400 watts rms power output per channel and Ecofficient Level 3 qualification
  1. Input Requirements
    1. Shall support two, balanced or unbalanced line level signals on two 3-pole, 3.5 mm captive screw connectors
    2. Shall support wiring of a mono source to the left input for bridged output operation
  2. Output Requirements
    1. Shall support two speaker level signals on one 4-pole, 5 mm screw-lock captive screw connector
    2. Shall provide a total of 800 watts rms output power with 400 watts rms per channel into 4 ohms, or 200 watts rms per channel into 8 ohms measured at 1 kHz with less than 0.05% THD
    3. Shall support bridging of the output to provide 800 watts rms output power into 8 ohms measured at 1 kHz with less than 0.05% THD
    4. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    5. Shall support a minimum load impedance of 4 ohms under normal operation or 8 ohms during bridged operation
    6. Shall provide a THD+N measurement of 0.1% measured from 20 Hz to 20 kHz, at 1 kHz and 3 dB below clipping
    7. Shall provide damping factor of greater than 100 at 8 ohms
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 154 watts during typical (1/8 power) operation with both output channels driven with 4 ohm loads
    2. Shall draw 93.1 watts during typical (1/8 power) operation with both output channels driven with 8 ohm loads
    3. Shall draw 28.3 watts during quiescent operation
    4. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 1 watt while in standby mode
      3. Shall return to full power status in less than one second upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -40 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    5. Shall meet Ecofficient Level 3 requirements
    6. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on one 2-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide two inputs on two 3-pole, 3.5 mm captive screw connectors
    2. Shall provide two outputs on one 4-pole, 5 mm screw-lock captive screw connector
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide standby control port on one 2-pole, 3.5 mm captive screw connector
    4. Shall provide recessed, detented potentiometers for attenuation adjustment
    5. Shall provide a switch for selecting bridged operation
    6. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    7. Shall provide green LEDs for input signal presence indication
    8. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, full rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under BSMI, CE, c-UL, and UL
      2. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      3. Shall meet EMI/EMC compliances under CE, CISPR 22 Class B, CISPR 24, C-tick, EN55103-1, EN55103-2, FCC Class B, ICES, KCC, and VCCI Class B
      4. Shall comply with appropriate requirements of EU code of conduct, RoHS, and WEEE
    3. Shall provide three year parts and labor warranty
2. Approved device shall be the Extron XPA 4002, part number 60-1244-01; no alternates or equals.

XPA 4002

Provide a compact, energy efficient audio amplifier that shall support two analog inputs and two amplified outputs with 200 or 400 watts rms power output per channel.
1. Compact stereo amplifier with 200 or 400 watts rms power output per channel and Ecofficient Level 3 qualification
  1. Input Requirements
    1. Shall support two, balanced or unbalanced line level signals on two 3-pole, 3.5 mm captive screw connectors
    2. Shall support wiring of a mono source to the left input for bridged output operation
  2. Output Requirements
    1. Shall support two speaker level signals on one 4-pole, 5 mm screw-lock captive screw connector
    2. Shall provide a total of 800 watts rms output power with 400 watts rms per channel into 4 ohms, or 200 watts rms per channel into 8 ohms measured at 1 kHz with less than 0.05% THD
    3. Shall support bridging of the output to provide 800 watts rms output power into 8 ohms measured at 1 kHz with less than 0.05% THD
    4. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    5. Shall support a minimum load impedance of 4 ohms under normal operation or 8 ohms during bridged operation
    6. Shall provide a THD+N measurement of 0.1% measured from 20 Hz to 20 kHz, at 1 kHz and 3 dB below clipping
    7. Shall provide damping factor of greater than 100 at 8 ohms
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 154 watts during typical (1/8 power) operation with both output channels driven with 4 ohm loads
    2. Shall draw 93.1 watts during typical (1/8 power) operation with both output channels driven with 8 ohm loads
    3. Shall draw 28.3 watts during quiescent operation
    4. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 1 watt while in standby mode
      3. Shall return to full power status in less than one second upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -40 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    5. Shall meet Ecofficient Level 3 requirements
    6. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on one 2-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide two inputs on two 3-pole, 3.5 mm captive screw connectors
    2. Shall provide two outputs on one 4-pole, 5 mm screw-lock captive screw connector
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide standby control port on one 2-pole, 3.5 mm captive screw connector
    4. Shall provide recessed, detented potentiometers for attenuation adjustment
    5. Shall provide a switch for selecting bridged operation
    6. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    7. Shall provide green LEDs for input signal presence indication
    8. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, full rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under BSMI, CE, c-UL, and UL
      2. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      3. Shall meet EMI/EMC compliances under CE, CISPR 22 Class B, CISPR 24, C-tick, EN55103-1, EN55103-2, FCC Class B, ICES, KCC, and VCCI Class B
      4. Shall comply with appropriate requirements of EU code of conduct, RoHS, and WEEE
    3. Shall provide three year parts and labor warranty
2. Approved device shall be the Extron XPA 4002, part number 60-1244-01; no alternates or equals.

XPA 4002-70V

Provide a compact, energy efficient audio amplifier that shall support two analog inputs and two amplified outputs with 400 watts rms per channel into a 70 volt line.
1. Compact stereo amplifier with 400 watts rms power output per channel into a 70 volt line and Ecofficient Level 3 qualification
  1. Input Requirements
    1. Shall support two, balanced or unbalanced line level signals on two 3-pole, 3.5 mm captive screw connectors
  2. Output Requirements
    1. Shall support two high impedance speaker level signals on two 2-pole, 5 mm screw-lock captive screw connectors
    2. Shall provide a total of 800 watts rms output power with 400 watts rms per channel into a 70 volt line measured at 1 kHz with 0.1% THD
    3. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    4. Shall support a minimum load impedance of 12.5 ohms
    5. Shall provide a THD+N measurement of 0.1% measured at 1 kHz and 3 dB below clipping
    6. Shall provide damping factor of greater than 100 at 12.5 ohms
    7. Shall provide a switch-selectable high pass filter for frequencies below 80 Hz with a 12 dB per octave rolloff
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 143 watts during typical (1/8 power) operation
    2. Shall draw 21 watts during quiescent operation
    3. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 1 watt while in standby mode
      3. Shall return to full power status in less than one second upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -40 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    4. Shall meet Ecofficient Level 3 requirements
    5. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on one 2-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide two inputs on two 3-pole, 3.5 mm captive screw connectors
    2. Shall provide two outputs on two 2-pole, 5 mm screw-lock captive screw connector
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide standby control port on one 2-pole, 3.5 mm captive screw connector
    4. Shall provide recessed, detented potentiometers for attenuation adjustment
    5. Shall provide a switch for selecting a high pass filter to roll off frequencies below 80 Hz
    6. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    7. Shall provide green LEDs for input signal presence indication
    8. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, full rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under BSMI, CE, c-UL, and UL
      2. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      3. Shall meet EMI/EMC compliances under CE, CISPR 22 Class B, CISPR 24, C-tick, EN55103-1, EN55103-2, FCC Class B, ICES, KCC, and VCCI Class B
      4. Shall comply with appropriate requirements of EU code of conduct, RoHS, and WEEE
    3. Shall provide three year parts and labor warranty
2. Approved device shall be the Extron XPA 4002-70V, part number 60-1245-01; no alternates or equals.

XPA 4002-70V

Provide a compact, energy efficient audio amplifier that shall support two analog inputs and two amplified outputs with 400 watts rms per channel into a 70 volt line.
1. Compact stereo amplifier with 400 watts rms power output per channel into a 70 volt line and Ecofficient Level 3 qualification
  1. Input Requirements
    1. Shall support two, balanced or unbalanced line level signals on two 3-pole, 3.5 mm captive screw connectors
  2. Output Requirements
    1. Shall support two high impedance speaker level signals on two 2-pole, 5 mm screw-lock captive screw connectors
    2. Shall provide a total of 800 watts rms output power with 400 watts rms per channel into a 70 volt line measured at 1 kHz with 0.1% THD
    3. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    4. Shall support a minimum load impedance of 12.5 ohms
    5. Shall provide a THD+N measurement of 0.1% measured at 1 kHz and 3 dB below clipping
    6. Shall provide damping factor of greater than 100 at 12.5 ohms
    7. Shall provide a switch-selectable high pass filter for frequencies below 80 Hz with a 12 dB per octave rolloff
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 143 watts during typical (1/8 power) operation
    2. Shall draw 21 watts during quiescent operation
    3. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 1 watt while in standby mode
      3. Shall return to full power status in less than one second upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -40 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    4. Shall meet Ecofficient Level 3 requirements
    5. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on one 2-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide two inputs on two 3-pole, 3.5 mm captive screw connectors
    2. Shall provide two outputs on two 2-pole, 5 mm screw-lock captive screw connector
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide standby control port on one 2-pole, 3.5 mm captive screw connector
    4. Shall provide recessed, detented potentiometers for attenuation adjustment
    5. Shall provide a switch for selecting a high pass filter to roll off frequencies below 80 Hz
    6. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    7. Shall provide green LEDs for input signal presence indication
    8. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, full rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under BSMI, CE, c-UL, and UL
      2. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      3. Shall meet EMI/EMC compliances under CE, CISPR 22 Class B, CISPR 24, C-tick, EN55103-1, EN55103-2, FCC Class B, ICES, KCC, and VCCI Class B
      4. Shall comply with appropriate requirements of EU code of conduct, RoHS, and WEEE
    3. Shall provide three year parts and labor warranty
2. Approved device shall be the Extron XPA 4002-70V, part number 60-1245-01; no alternates or equals.

Aggiungi articolo al carrello

Order Message Number

Codice articolo

Nota: I prodotti Extron che usano la presa AC universale accettano molti tipi di prese AC diversi. Prima dell’uso, si assicuri che il dispositivo soddisfi tutti i requisiti normativi per la sua regione e sia conforme con i codici e gli standard locali di sicurezza ed elettrici applicabili.

Q.tà

Totale attuale:

Visualizza carrello

XPA 4002 -

Dettagli del prodotto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Condividi l'articolo via e-mail

XPA 4002

Amplificatore a due canali - 400 W per canale

Invia a: *

La preghiamo di inserire un indirizzo e-mail valido.

Messaggio:

( caratteri rimanenti)

Inviami una copia

Grazie. Il messaggio è stato inviato.

Si è verificato un errore durante l'invio del messaggio. Riprovare più tardi.